70-291 Materials To Score 1000, Still Valid, LINKS UPDATED, 16th March 2008

SALAM everyody,

I Passed 70-291 with 960/1000, “ALHAMDULILLAH” few months ago.
why not 1000? because Corrections below were not known before my test.

Very Sorry For being late to right this Guide , Especially for those who asked alot for it.

Materials:
Evilren’s pdf: hxxp://www.ziddu.com/download.php?uid=aayilJiob7CfnJzzaqqZnJGla6eam5w%3D8 [by my friend 2467 thanks for him]
Evilren’s vce: hxxp://www.ziddu.com/download.php?uid=abGinZitcbOeluKnaKqhkZSoZauflpio8
MXSim: hxxp://www.ziddu.com/download.php?uid=aKydmpitZ6ucmJytsKyZlJyiYq2WlZqt2
Corrections:

All u need for 70-291 is Evilrens vce from link above And corrections.
Sims needed are only three wich are included in the same vce.
One of the sims is made on a video in the link above.

Corrections:

1. The question about DNS.
One main office and 4 sites. 2 locations connected with high speed links and 2 with low speed.
The question stated that even the sites connected with low speed should get zone updates,
since the main office was planning changes to NS records.
So choose the Stub Zone for the sites connected with low speed links.

2. Question No. 108 WSUS on perimeter network have to “Save the updates to a local folder” not Maintain Updates on Windows Update Server (Server on the Perimeter Network)

3. Question No. 107
EvilRen – (User Settings Section) is wrong. should be (Computer Settings Section) as in p4s

4.RRAS sim correction
=====================================
Routing and Remote Access Simulation: Make sure when you create an Inbound Filter that you also choose the option to “Receive all packets accept those that meet the criteria below” because it automatically defaults to “Drop all packets accept those that meet the criteria below”.

Note: (by Visar Lushta)… Thanks Visar.
Be careful when choosing the network interface on static routing in RRAS simulation,
Question states:
* Add a static route for the 192,168.3.0/24 to be getaway for 192.168.4.245?
Chose the Local Are Network 2 that belongs to the same network as getaway requested by a question, not a Local Are Network.

Last Exam Taker:

QUOTE (Robert53 @ Mar 6 2008, 01:01 PM)

Thanks Visar Lushta, i passed 70-291 with 1000/1000 few hours ago, location=MSIA. All the materials and simulation is still valid. especial thanks to LORDYYYY. thx u very much. And thanks to Evilren and all member in sadikhov……………..

I wish YOU the liberation of Palestine from THE MEDITERRANEAN TO RIVER JORDAN.

QUESTION 1
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single Active Directory domain named Certkiller .com. All
servers on the Certkiller .com network run Windows Server 2003 and all client
computers run Windows XP Professional.
Users that work in the Human Resources department access confidential files that
reside in a shared folder named EmployeePerformance. No users that work in other
Certkiller .com business units must be able to access these files. You configure the
necessary shared and NTFS permissions to ensure that only Human Resources
department users have access to the files within the EmployeePerformance folder.
You have been instructed to perform monitoring, to ensure that no users other than
those that work in the Human Resources department, can access the data in the
EmployeePerformance folder. To perform this exercise, you decide to use a user
account that does not have the shared and NTFS permissions assigned which are
granted to the Human Resources security group for the folder.
What should you do to ensure that this user account cannot access the files stored in
the EmployeePerformance shared folder?
A. Enable auditing for failed events in Privilege Use
Use Event Viewer to examine the logged event entries
B. Enable auditing for failed events in Directory Service.
Use Event Viewer to examine the logged event entries.
C. Enable auditing for failed events in Object Access.
Use Event Viewer to examine the logged event entries.
D. Assign the Generate security audits user right to the user account.
Use Event Viewer to examine the logged event entries.
Answer: C
Explanation: Configuring the Object Access audit policy in this manner will let you
know when this user account attempted to access the EmployeePerformance folder
and failed to access the Human Resources department’s files. To view all logged event
entries.
Incorrect Answers
A: The Privilege Use audit policy tracks when a user effects a user right. You do not
want to track events for all rights.
B: The Directory Service audit policy tracks when users access Active Directory objects
which have system access control lists (SACLs).
D: You do not want to enable the user account to make entries in the security log for

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

Actualtest.org – The Power of Knowing
object access auditing. You want to verify that the user account cannot access the
EmployeePerformance shared folder.
QUESTION 2
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single Active Directory domain named Certkiller .com. All
servers on the Certkiller .com network run Windows Server 2003 and all client
computers run Windows XP Professional.
A member server named Certkiller -SR13 is configured as the Software Update
Services (SUS) server on the Certkiller .com network. Certkiller -SR13 is
configured to synchronize directly with the Microsoft Windows Update servers each
day, using the default synchronization schedule. All client computers reside in an
organizational unit (OU) named Workstations. All client computers use Automatic
Updates client software to download security updates from Certkiller -SR13. A
Group Policy Object (GPO) named Updates contains the automatic update settings,
and is linked to the Workstations OU.
You receive instruction to verify that a critical update has been installed on all client
computers. You verify that the specific critical update is available on
Certkiller -SR13. You discover though that the critical update has NOT been
installed on any client computers. You notice though that a number of subsequent
updates have been installed on the client computers.
What should you do to immediately install the critical update on all client
computers?
A. In the Updates GPO, enable the Configure Automatic Update setting.
B. For each client computer, open the System Properties dialog box, and set the Keep my
computer up to date option.
C. In Internet Explorer, navigate to the SUS Administration page and approve the critical
update for distribution to your client computers.
D. In the Updates GPO, enable the Reschedule Automatic Updates scheduled
installations option.
Answer: C
Explanation: The question states that a number of subsequent updates have been
installed on the client computer, which indicate that the Configure Automatic
Update setting is enabled in the Updates GPO. The question also states that this
specific critical update is available on Certkiller -SR13. These two facts point to an
update has not yet been approved on the SUS Administration page, for distribution
to client computers. To resolve the issue, in Internet Explorer, navigate to the SUS
Administration page and approve the critical update.
Incorrect Answers
A: Because a number of subsequent updates have been installed on client computers
and the update is available on your SUS server, theConfigure Automatic Update

Actualtest.org – The Power of Knowing
setting is enabled in the Updates GPO.
B: Because a Group Policy Object (GPO) named Updates contains the automatic
update settings, the Keep my computer up to date
option will not be available for selection on any client computers.
D: Enabling the Reschedule Automatic Updates scheduled installations option will
only result in the computer running the update process again if it happened to be
unavailable (offline) when the last schedule was run. This will not resolve your issue.
QUESTION 3
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single Active Directory domain named Certkiller .com. All
servers on the Certkiller .com network run Windows Server 2003 and all client
computers run Windows XP Professional.
A member server named Certkiller -SR13 is configured as the Software Update
Services (SUS) server on the Certkiller .com network. Certkiller -SR13 is
configured to synchronize directly with the Microsoft Windows Update servers each
day, using the default synchronization schedule. All client computers reside in an
organizational unit (OU) named Workstations. All client computers use Automatic
Updates client software to download security updates from Certkiller -SR13. A
Group Policy Object (GPO) named Updates contains the automatic update settings,
and is linked to the Workstations OU.
You receive instruction to verify that a critical update has been installed on all client
computers. You verify that the specific critical update is available on
Certkiller -SR13. You discover though that the critical update has NOT been
installed on any client computers. You notice though that a number of subsequent
updates have been installed on the client computers.
What should you do to immediately install the critical update on all client
computers?
A. In the Updates GPO, enable the Configure Automatic Update setting.
B. For each client computer, open the System Properties dialog box, and set the Keep my
computer up to date option.
C. In Internet Explorer, navigate to the SUS Administration page and approve the critical
update for distribution to your client computers.
D. In the Updates GPO, enable the Reschedule Automatic Updates scheduled
installations option.
Answer: C
Explanation: The question states that a
number of subsequent updates have been installed on the client computer, which
indicate that the Configure Automatic Update setting is enabled in the Updates
GPO. The question also states that this specific critical update is available on
Certkiller -SR13. These two facts point to an update has not yet been approved on

Actualtest.org – The Power of Knowing
the SUS Administration page, for distribution to client computers. To resolve the
issue, in Internet Explorer, navigate to the SUS Administration page and approve
the critical update.
Incorrect Answers
A: Because a number of subsequent updates have been installed on client computers
and the update is available on your SUS server, theConfigure Automatic Update
setting is enabled in the Updates GPO.
B: Because a Group Policy Object (GPO) named Updates contains the automatic
update settings, the Keep my computer up to date option will not be available for
selection on any client computers.
D: Enabling the Reschedule Automatic Updates scheduled installations option will
only result in the computer running the update process again if it happened to be
unavailable (offline) when the last schedule was run. This will not resolve your issue.

Pls anybody who takes this exam allways keep us updated to change and update this Topic as needed.

Free download:passguide Microsoft 70-291
Free download:passguide Microsoft 70-291

password:www.certbible.org

PassGuide Cisco Exams Questions & Training Materials

1. Free 70-291 Materials To Score 1000
2. Free [offer] 70-236 Updated, Grab these 3 links for 1000/1000
3. Free 70-290 Study Material To Archive 928/1000, TestInside_by_dundar_ver_9.5_corrected
4. Free MCSE Exam 70-296 Study Guide and DVD Training System: Planning, Implementing and Maintaining a Windows Server 2003 Environment for a MCSE Certified on Windows 2000
5. Free [offer] 70-294 Updated, All for passing exam
6. Free free cbt mcse Exam-Pack 70-296: MCSE 2003 Upgrade
7. Free all 70-270 Mcp Stuffs !
8. Free Download Latest 070-297 dumps from here…
9. Free Passguide Microsoft exams test download
10. Free Passguide 087-170 exam simulator dumps
11. Free Testout : (MCSE 70-290) Managing and Maintaining a Windows 2003 Network
12. Free testinside 70-270 In Vce