Cisco:642-892 Composite Updated
- Friday, July 4, 2008, 18:08
- Cert Tests
- 126 views
- Add a comment
The CCNP certification, located at the second layer of the Cisco certification program pyramid, validates that certification holders have a wide range of network knowledge. They can install, configure and operate LAN, WAN and dial access service with 100 to 500 or more nodes.
As a combination of 642-901 BSCI and 642-812 BCMSN, 642-892 Composite is more difficult than either of them but cheaper than the total cost of the two exams. 642-892 is a good option for well-prepared candidates.
642-892 has been updated in VUE exam center by the beginning of April. pass4side updated our 642-892 exam product to guarantee over 95% coverage of the exam. For details, go to http://www.pass4side.com/642-892.htm.
Basic Information of 642-892
Exam Number: 642-892
Associated Certifications: CCNP . CCDP
Duration: 120minutes(30 extra minutes for Non-English speaking countries)
Available Languages: English
Questions: 66 (2 more questions than the earlier version)
Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.
Implement EIGRP operations
Explain the functions and operations of EIGRP (e.g., DUAL)
Configure EIGRP routing. (e.g., Stub Routing, authentication, etc.)
Verify or troubleshoot EIGRP routing configurations
Implement multi-area OSPF operations
Explain the functions and operations of multiarea OSPF
Configure multiarea OSPF routing. (e.g., Stub, NSSA, authentication, etc.)
Verify or troubleshoot multiarea OSPF routing configurations
Describe integrated IS-IS
Describe the features and benefits of integrated IS-IS
Configure and verify integrated IS-IS
Implement Cisco IOS routing features
Describe, configure or verify route redistribution between IP routing IGPs. (e.g., route-maps, default routes, etc.)
Describe, configure or verify route filtering (i.e., distribute-lists and passive interfaces)
Describe and configure DHCP services (e.g., Server, Client, IP helper address, etc.)
Implement BGP for enterprise ISP connectivity
Describe the functions and operations of BGP
Configure or verify BGP operation in a non-transit AS (e.g., authentication)
Configure BGP path selection. (i.e., Local Preference, AS Path, Weight or MED attributes)
Implement multicast forwarding
Describe IP Multicast (e.g., Layer-3 to Layer-2 mapping, IGMP, etc.)
Describe, configure, or verify IP multicast routing (i.e., PIM Sparse-Dense Mode)
Implement IPv6
Describe IPv6 addressing operations
Describe IPv6 interoperation with IPv4
Describe, configure or verify OSPF routing with IPv6 addressing
Implement VLANs
Explain the functions of VLANs in a hierarchical network
Configure VLANs (e.g., Native, Default, Static and Access)
Explain and configure VLAN trunking (i.e., IEEE 802.1Q and ISL)
Explain and configure VTP
Verify or troubleshoot VLAN configurations
Conduct the operation of Spanning Tree protocols in a hierarchical network
Explain the functions and operations of the Spanning Tree protocols (i.e., RSTP, PVRST, MISTP)
Configure RSTP (PVRST) and MISTP
” Describe and configure STP security mechanisms (i.e., BPDU Guard, BPDU Filtering, Root Guard)
Configure and Verify UDLD and Loop Guard
Verify or troubleshoot Spanning Tree protocol operations
Configure and verify link aggregation using PAgP or LACP
Implement Inter-VLAN routing
Explain and configure Inter-VLAN routing (i.e., SVI and routed ports)
Explain and enable CEF operation
Verify or troubleshoot InterVLAN routing configurations
Implement gateway redundancy technologies
Explain the functions and operations of gateway redundancy protocols (i.e., HSRP, VRRP, and GLBP)
Configure HSRP, VRRP, and GLBP
Verify High Availability configurations
Describe and configure wireless client access
Describe the components and operations of WLAN topologies (i.e., AP and Bridge)
Describe the features of Client Devices, Network Unification, and Mobility Platforms (i.e., CCX, LWAPP)
Configure a wireless client (i.e., ADU)
Describe and configure security features in a switched network
Describe common Layer 2 network attacks (e.g., MAC Flooding, Rogue Devices, VLAN Hopping, DHCP Spoofing, etc.)
Explain and configure Port Security,802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI
Verify Catalyst switch (IOS-based) security configurations (i.e., Port Security, 802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI)
Configure support for voice
Describe the characteristics of voice in the campus network
Describe the functions of Voice VLANs and trust boundaries
Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice)
The following PDF contains certain questions of 642-892 from pass4side. You can go to www.pass4side.com to obtain more information from our live support assistants.
QUESTION 36:
What is the purpose of the “eigrp stub” configuration command?
A. To increase scalability by limiting the EIGRP query range.
B. To reduce the size of the routing table by blocking the D EX (External EIGRP) routes
in the EIGRP stub router.
C. To reduce the convergence time by enabling the EIGRP stub router to propagate the
EIGRP queries from the EIGRP hub router.
D. To reduce the convergence time by enabling the EIGRP stub router to also perform
query requests to the EIGRP hub router.
QUESTION 37:
The Certkiller network administrator has issued the “EIGRP stub” command on
router CK8 . What is the purpose of the “EIGRP stub” configuration command?
A. to reduce the convergence time by enabling the EIGRP stub router to propagate the
EIGRP queries from the EIGRP hub router.
B. to increase scalability by limiting the EIGRP query range.
C. to reduce the size of the routing table by blocking the D EX (External EIGRP) routes
into the EIGRP stub router.
D. to reduce the convergence time by enabling the EIGRP stub router to also perform
query requests to the EIGRP hub router.
E. None of the above.
Questions and Answers : 326 Q&As Updated: October 24th , 2008 Price: $119.99 $89.99
Free download:pass4sure 642-892
Free download:testking 642-892
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Free Certification Exam Download has written 10018 stories on this site.
If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!
