Download pass4sure cisco ccnp 642-892 3.27 version rapidshare links
- Saturday, October 25, 2008, 7:02
- Cert Tests
- 1,308 views
- Add a comment
cisco Composite : 642-892 Exam Product Description
Exam Number/Code: 642-892
Exam Name: Composite
Testking 642-892 Exam will provide you with exam simulation questions and actual answers that reflect the actual exam. These Testking 642-892 simulation questions and answers provide you with the experience of taking the actual test. Testking 642-892 Exam is not just simulation questions and answers. They are your access to high technical expertise and accelerated learning capacity. Testking 642-892 questions have detailed explanations for every answer and thus ensures that you fully understand the questions and the concept behind the questions.
QUESTION 60
You are in the midst of configuring an NBMA network with EIGRP as the routing
protocol. Which of the options below would you use to configure the interface
bandwidth for a point-to-point interface?
A. The DLCI assigns the bandwidth for the interface.
B. The sliding window size determines interface bandwidth.
C. You should use the default bandwidth assigned to the interface.
D. You should manually configure bandwidth as the CIR of the PVC.
E. None of the above.
Answer: D
Explanation:
The bandwidth can be configured separately on each subinterface. Since this is NBMA
we can assume that Frame Relay is used. For Frame Relay on point-to-point the
bandwidth should be set it to the CIR of the PVC.
Note 1: NBMA (Non-broadcast Multi-access) supports many (more than two) routers,
but have no broadcast capability. Frame Relay and X.25 are example of NBMA.
Note 2: The CIR (Committed Information Rate) is the committed rate (in bits per
second) at which the ingress access interface trunk interfaces, and egress access interface
of a Frame Relay network transfer information to the destination Frame Relay end
system under normal conditions.
Incorrect Answers:
A: Does not apply.
B: Sliding windows does not apply.
C: The bandwidth can and should be configured separately on each subinterface.
Reference: Configuration Notes for the Enhanced Implementation of EIGRP
http://www.cisco.com/warp/public/103/12.html
QUESTION 61
Router CK2 is configured for EIGRP as shown below:
router eigrp 100
QUESTION 61
Router CK2 is configured for EIGRP as shown below:
router eigrp 100
QUESTION 62
The Certkiller EIGRP network is utilizing the EIGRP stub routing feature. Which of
the following are key concepts that apply when configuring the EIGRP stub routing
feature in a hub and spoke network? (Select three)
A. A hub router prevents routes from being advertised to the remote router.
B. Only remote routers are configured as stubs.
C. Stub routers are not queried for routes.
D. Spoke routers connected to hub routers answer the route queries for the stub router.
E. A stub router should have only EIGRP hub routers as neighbors.
F. EIGRP stub routing should be used on hub routers only.
Answer: B, C, E
Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any ExamsExplanation:
The Enhanced Interior Gateway Routing Protocol (EIGRP) Stub Routing feature
improves network stability, reduces resource utilization, and simplifies stub router
configuration.
Stub routing is commonly used in a hub and spoke network topology. In a hub and spoke
network, one or more end (stub) networks are connected to a remote router (the spoke)
that is connected to one or more distribution routers (the hub). The remote router is
adjacent only to one or more distribution routers. The only route for IP traffic to follow
into the remote router is through a distribution router. This type of configuration is
commonly used in WAN topologies where the distribution router is directly connected to
a WAN. The distribution router can be connected to many more remote routers. Often,
the distribution router will be connected to 100 or more remote routers. In a hub and
642-892
spoke topology, the remote router must forward all nonlocal traffic to a distribution
router, so it becomes unnecessary for the remote router to hold a complete routing table.
Generally, the distribution router need not send anything more than a default route to the
remote router.
When using the EIGRP Stub Routing feature, you need to configure the distribution and
remote routers to use EIGRP, and to configure only the remote router as a stub. Only
specified routes are propagated from the remote (stub) router. The router responds to
queries for summaries, connected routes, redistributed static routes, external routes, and
internal routes with the message “inaccessible.” A router that is configured as a stub will
send a special peer information packet to all neighboring routers to report its status as a
stub router.
This feature should only be used on stub routers. A stub router is defined as a router
connected to the network core or distribution layer through which core transit traffic
should not flow. A stub router should not have any EIGRP neighbors other than
distribution routers. Ignoring this restriction will cause undesirable behavior.
Reference:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a0080087026.html
“Composite”, also known as 642-892 exam, is a Cisco certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 326 Q&As to your 642-892 Exam preparation. In the 642-892 exam resources, you will cover every field and category in CCNP helping to ready you for your successful Cisco Certification.
The Composite exam (642-892) is the quickest way for currently certified Cisco Certified Network Professionals (CCNP®) and Cisco Certified Design Professionals (CCDP®) to obtain recertification. The exam tests skills and knowledge pertaining to the Building Scalable Cisco Internetworks (BSCI) and Building Cisco Managed Switched Networks (BCMSN) courses. Composite may be taken to recertify CCNP and CCDP certifications; it may also be taken in place of the BSCI and BCMSN exams required for CCNP and CCDP certifications. Candidates must successfully pass both routing and switching subsections of the Composite exam to successfully pass the exam.
pass4sure ccnp 642-892 Questions and Answers : 326 Q&As
# Updated: October 24th , 2008
# Price: $119.99 $89.99
Free download:pass4sure 642-892
Free download:testking 642-892
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Free Certification Exam Download has written 10018 stories on this site.
If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!
