dynamips VOIP Lab2 – Voice Over Frame Relay

The Topology is the same the Voip Lab1 – Voice Over IP Over FR (http://www.netemu.cn/bbs/thread-8714-1-3.html)

Configuration:

the topology is the same as the Lab1

R1(config-dial-peer)#do show run
Building configuration…

Current configuration : 1929 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
memory-size iomem 5
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
no ip domain lookup
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.2.150 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial1/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
no fair-queue
serial restart-delay 0
clockrate 64000
no dce-terminal-timing-enable
frame-relay traffic-shaping
frame-relay interface-dlci 102

PassGuide Cisco Exams Questions & Training Materials

1. Free VOIP Lab1 – Voice Over IP Over Frame Relay
2. Free Cisco Ip Comunicator Free Full Version
3. Free Frame Relay LMI And LMI Autosense
4. Free Cisco Frame Relay Solutions Guide
5. Free Cisco Frame Relay Solutions Guide
6. Free [offer] Ccie Voice Home Lab With Dynamips/vmware
7. Free CCNA TechLab: Configuring a Frame Relay network
8. Free Analysis on exam 640-802 —Analysis on DLCI configuration of Frame-relay
9. Free How to pass RIP routes between spokes (connected through a hub subif)
10. Free VOIP Lab 3 – CBWFQ, LLQ, Diffsrv , RSVP (Net)
11. Free ActualTest 640-863
12. Free New P4s CCNP Bcmsn 642-812 v2.95