EMC TestInside E20-535 v3 28 by JAM217 120q.vce

Networked Storage – NS Implementation Exam : E20-535 Exam2. What is a component of CIFS?
A. NIS
B. FTP
C. NFS
D. UNC
Answer: D

3. An FSN device is configured with physical devices of dissimilar characteristics. What is the reason for
implementing the “primary” option on this device?

A. To ensure that both paths are always active
B. To allow connectivity to dissimilar network switches
C. To ensure the best path is given priority for functionality
D. To prevent the primary path for automatically resuming on recovery
Answer: C
4. What accurately describes the process of adding a Data Mover to an NS-series Celerra?
A. The NS system must be powered off
B. The Control Station must be powered off
C. The Data Mover is added non-disruptively
D. The existing Data Mover must be powered off
Answer: C

5. When using a Symmetrix in a Fibre Channel environment, how is the Fibre Channel WWN of the FA
determined?
A. Hardware manufacturer, system serial number, and FA slot ID
B. iSNS registration number, system serial number, and FA slot ID
C. Hardware manufacturer, system IP address, and FA serial number
D. iSNS registration number, system IP address, and FA serial number
Answer: A

6. What is a characteristic of Kerberos?
A. Uses access tokens to hold a user’s SID
B. Key Distribution Center manages the keys
C. Security encryption used by authentication protocols
D. Provides encryption of passwords sent to Domain controllers
Answer: B

7. You are performing a Data Mover failover test of server_2 at a time that will pose minimal impact to corporate
users. After performing the failover, you verify that the standby Data Mover successfully mounts, exports all file
systems, and takes over as server_2.
Five minutes after the failover, users begin reporting that they can no longer access some of their shares. After
further investigation you find that, while most shares are accessible via the CIFS servers on server_2, all shares
exported through the “finance1″ CIFS server are inaccessible. You also learn that the “finance2″ and
“engineering1″ CIFS servers on server_2 are worguide without problems.
What is the likely cause of the problem?
A. The CIFS service was not started on the standby Data Mover.
B. The CIFS service was not started for the “finance1″ CIFS server.
C. New disks were added to the storage array but were never added to the configuration database for the standby
Data Mover.
D. The network cable of the standby Data Mover, associated with the “finance1″ CIFS server, is assigned to the
incorrect VLAN.
Answer: D

8. You are performing a Data Mover failover test of server_2 at a time that will pose minimal impact to corporate
users. The Data Mover is used only to export CIFS shares.
What should be done to verify the failover was successful?
A.Check that all file systems were mounted using server_mount
Check that all file systems were exported using server_export
Verify that the CIFS service has started using server_cifs
Verify network connections using ping to ping the default gateway
B.Check that all file systems were exported using server_export
Verify that the CIFS service has started using server_cifs
Verify network connections by accessing all data from network clients
Verify access to CIFS shares as a new user
C.Check that all file systems were mounted using server_mount

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

Check that all file systems were exported using server_export
Verify that the CIFS service has started using server_cifs
Verify network connections using server_sysconfig and server_ifconfig
D.Check that all file systems were mounted using server_mount
Check that all file systems were exported using server_export
Verify that the CIFS service has started using server_cifs

Verify network connections using server_ping to ping the default gateway
Answer: B

9. You are performing a Data Mover failover test of server_2 at a time that will pose minimal impact to corporate
users. After performing the failover, you verify that the standby Data Mover successfully mounts, exports all file
systems, and takes over as server_2.
Five minutes after the failover, users begin reporting that they can no longer access some of their shares. After
further investigation you find that, while most shares are accessible via the CIFS servers on server_2, all shares
exported through the “finance1″ CIFS server are inaccessible. You also learn that the “finance2″ and
“engineering1″ CIFS servers on server_2 are worguide without problems.
What is the likely cause of the problem?
A. The CIFS service was not started on the standby.
B. The CIFS service was not started for the “finance1″ CIFS server.

C. The Ethernet switch has Etherchannel configured for the primary Data Mover connections but not the standby.
D. New disks were added to the storage array but were never added to the configuration database for the standby
Data Mover.
Answer: C

10. What is a rule for a standby Data Mover configuration?
A. A standby can be created for a standby
B. File systems cannot be temporarily mounted on the standby
C. The standby must not have the same disk configuration as the primary
D. A Data Mover can perform the role of a primary and standby Data Mover at the same time
Answer: B

EMC e20-535 Exam

Practice Exam e20-535
Product Description:
Exam Number/Code: e20-535

EMC TestInside E20-535 v3 28 by JAM217 120q.vce

E20-535

29-Jul-2008

Free download:passguide EMC E20-535
Free download:passguide EMC E20-535
Networked Storage – NS Implementation
Test

PassGuide Cisco Exams Questions & Training Materials

1. Free passguide HP0-A02
2. Free Passguide 087-170 exam simulator dumps
3. Free Download latest 070-290 Latest Testinside dumps & Video simulations from here…
4. Free A Service For You (make The Testinside Printable)
5. Free Passguide cisco 640-822
6. Free passguide emc e20-845 v2.83
7. Free Testinside 70-291 Printable
8. Free Topcerts 70-648 120q&a
9. Free New Testinside VMWare VCP-310 v6.78
10. Free EMC E20-001 Exam Storage Technology Foundations
11. Free [Offer] 642-383 dumps
12. Free passguide HP0-093