free ccda 640-863 vce
- Monday, April 28, 2008, 17:58
- Study Guide
- 177 views
- Add a comment
Practice exams in VCE format:
| File | Size | Last Modified |
| Cisco Braindumps 640-863 by carth.vce | 2.01 MB | 22-Jan-2008 |
QUESTION 86
During routine maintenance, your issue the show interface Fast Ethernet 0 command on
Router CK1 . The output from the command is shown in the following exhibit:
FastEthernet0 is up, line protocol is up
Hardware is DEC21140, address is 00e0.1ea8.e299 (bia
00e0.1ea8.e299)
Description: Ethernet 100Mbps
Internet address is 10.11.11.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load
3/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of “show interface” counters 6 weeks, 3 days
Queuing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 1953000 bits/sec, 652 packets/sec
5 minute output rate 1407000 bits/sec, 600 packets/sec
47250970 packets input, 3285704002 bytes, 0 no buffer
Received 257038 broadcast, 1056 runts, 0 giants, 0 throttles
1918 input errors, 462 CRC, 0 frame, 0 overrun, 0 ignored, 0
abort
0 watchdog, 0 multicast
311 input packets with dribble condition detected
46457848 packets output, 3093573182 bytes, 0 underruns
0 output errors 759 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Based on the information above, should you be concerned with the operation of this
interface?
A. Yes. There is a physical problem with the connection since there are recorded Runts
and CRCs.
B. No. The interface is normal for a 100mb full duplex environment.
C. Yes. There are an excessive amount of collisions that could result from a cable that is
too long.
D. No. Collisions, runts and CRC’s are normal for a 100mb half-duplex connection.
E. None of the above.
QUESTION 87
The Certkiller switched LAN network is upgrading many of the switch links to
Gigabit Ethernet. Which of the following IEEE standards are used for Gigabit
Ethernet? (Choose all that apply)
A. 802.3z
B. 802.3ab
C. 802.3ad
D. 802.3af
E. All of the above
Free download:pass4sure ccda 640-863
Free download:testking ccda 640-863
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Free Certification Exam Download has written 10018 stories on this site.
If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!
