HP0-761

Monday, September 22, 2008, 6:07
Exam Topics
64 views
8 comments

HP Certified Professional NonStop Advanced and Communications– Level 2
Exam # HP0-761
Exam Preparation Guide

Check the web site for course descriptions and prerequisites at:
http://education.hp.com/curr-nonstop.htm (Instructor-Led Training)
http://education.nonstop.compaq.com/us/cat/httoc.htm (Self-Study Training)
You can also call (800) 621-9198 in North America, to speak with one of our education consultants or register for courses.
Or, you can email us at: nonstop.training@Compaq.com

Exam Status

The NonStop Advanced Networking and Communications – Level 2 exam has completed
beta testing and is now live. This exam is administered by Prometric Regional Service Centers in North America (other locations may have different delivery methods). Refer to the Prometric website: http://www.2test.com

Exam Details

Number of test items: 82

Time allotted to take test: 90 minutes

Passing Score: 61% – 50 items correct

You are not allowed to refer to any books or reference material during the NonStop Advanced
Networking and Communications – Level 2 exam.

Exam Preparation Guide: Exam HP0-761 1
NonStop Advanced Networking and Communications – Level 2

Audience

This exam is targeted for the following personnel, with a minimum of one-year experience on
the HP NonStop S-Series platforms running the G-Series NonStop Kernel Operating
System:

• Authorized Service and Support personnel (field support technicians), who perform installations, upgrades, troubleshooting and maintenance tasks.

• Global Customer Support Center (GCSC) personnel, who may have specialized technical expertise in the operating system (e.g., security features, hardware, subsystems) and
serve as support for both field support technicians and customers.

• Analyst SEs or Pre-SalesTechnical Support (PSTS) personnel, who perform pre-sales consulting and technical account support, including tasks such as assessment of customer needs, system sizing and configuration, installation consulting, and so forth.

• NonStop Kernel Software Developers, System Integrators and Consultant Partners, Authorized Service Channel Partners and Distributors, Customers authorized to service their own equipment.

Exam Preparation Guide: Exam HP0-761 2
NonStop Advanced Networking and Communications – Level 2

What You’ll Be Tested On

Exam questions were written to evaluate your knowledge of the following objectives. The
percentage of items dedicated to each major category is included in parenthesis.

1) S-Series Network Architecture (21%)

1.1 Describe the S-Series LAN connectivity
• Describe the software and hardware components of the SLSA subsystem
• Identify the access methods and protocols available for Ethernet connections
• Identify the access methods and protocols available for Token Ring connections
• Identify the access methods and protocols available for ATM connections
• Describe the features and benefits of conventional and Parallel Library
TCP/IP
• Describe the features and benefits of NonStop IPX/SPX
• Describe the use of SNA over LAN connections

1.2 Describe the S-Series WAN connectivity
• Describe the software and hardware components of the WAN subsystem
• Describe the function of the AWAN device
• Describe the terminal types and protocols supported on an AWAN device
• Describe the function of the SWAN concentrator
• Identify the software and hardware components in the SWAN
configuration
• Identify the interface types supported on the SWAN device
• Identify supported SWAN access methods and protocols
• Describe the various SNA software products and their use

1.3 Describe the S-Series intersystem connectivity
• Identify the S-Series intersystem hardware connection options
• Describe the advantages of each inter-system connection option
• Identify the components found in the FOX and ServerNet Cluster subsystems
• Describe the function and benefits of Expand
• Describe how best to achieve a fault tolerant intersystem connection
• Describe the use and function of the ESCON device for connecting to an
IBM host

1.4 Discuss the application interface for the NonStop communications subsystems
• Identify the relationship between the Guardian file system and Expand
• Describe the application interfaces for the SNAX product family
• Identify the TCP/IP application interfaces for Guardian and OSS

Exam Preparation Guide: Exam HP0-761 3
NonStop Advanced Networking and Communications – Level 2

1.5 Discuss the network management interfaces and tools
• Identify the key tools used to manage NonStop communication subsystems
• Describe the function of Distributed Systems Management
• Describe the use of the SCF command interface
• Describe the features of common management tools and applications
• Describe the function of SNMP and the NonStop SNMP product set

2) Network Planning (10%)

2.1 Identify the system and network connectivity requirements
• Determine the application profile
• Determine the number of users accessing the applications
• Determine the number and size of NonStop S-Series servers participating in the application environment
• Identify the host types connected to the network
• Identify the protocols and connection types available on each host
• Describe geographic distribution of hosts
• Identify application availability requirements
• Identify the current and strategic network technologies

2.2 Describe formulation of a network design
• Identify potential NonStop S-series protocol and connectivity combinations
• Identify the limitations and potential bottlenecks inherent to each connection type
• Describe the trade-offs of each potential connection type
• Define resource naming conventions
• Demonstrate the ability to create network diagrams/illustrations

2.3 Describe a network installation plan
• Identify the required NonStop S-Series software and hardware components
• Describe a NonStop network system configuration
• Identify NonStop hardware installation planning documentation
• Identify key elements of a network topology diagram
• Identify network configuration files
• Describe impact of change on the network configuration
• Describe a schedule for installation and integration of hosts

3) Network Configuration and Installation (28%)

3.1 Demonstrate appropriate use of configuration tools
• Describe the use of WanWizard Pro tool
• Describe the use of SCF templates (profile files)
• Describe the use of TSM to install ServerNet Cluster
• Describe the use of TSM to manage SWAN
• Describe various tools used to manage AWAN

Exam Preparation Guide: Exam HP0-761 4
NonStop Advanced Networking and Communications – Level 2

3.2 Describe TSM configuration options
• Describe advanced TSM configuration

3.3 Describe Expand subsystem configuration
• Identify the configuration for Expand over ServerNet cluster
• Expand over multi-CPU
• Expand over ATM
• Expand over Expand-IP
• Expand over FOX
• Expand over WAN
• Expand over SNAX
• Expand over X.25

3.4 Describe TCP/IP subsystem configuration
• Identify the configuration of multi-process TCP/IP for a single LAN
controller
• Identify the configuration of an alias IP address
• Describe TCP/IP configuration limitations
• Identify the configuration of Telnet servers

3.5 Describe WAN subsystem configuration
• Identify SWAN clip limitations
• Identify configuration requirements for WAN printing
• Identify AWAN limitations (without GAP software)
• Identify SWAN configuration parameters

3.6 Describe SNAX subsystem configuration
• Identify the configuration of SNAX over Token Ring
• Identify the configuration of SNAX over Ethernet
• Identify the configuration of SNAX over ESCON
• Identify the configuration of SNAX over WAN
• Describe SNAX product attributes
• Identify the configuration of multiple SSCPs
• Identify the configuration of PAM

3.7 Describe Parallel TCP/IP subsystem configuration
• Identify the configuration of Parallel TCP/IP
• Describe the differences between Parallel and conventional TCP/IP
• Identify the configuration of Ethernet failover

3.8 Describe ATM subsystem configuration
• Identify the configuration of the ATM subsystem
• Describe the difference between ATM-1 and ATM-2

Exam Preparation Guide: Exam HP0-761 5
NonStop Advanced Networking and Communications – Level 2

3.9 Describe X.25 subsystem configuration
• Identify the configuration of the X.25 subsystem
• Identify the configuration of the X.25 loopback network
• Identify the configuration of TCP/IP over X.25

3.10 Describe SLSA subsystem configuration
• Identify the configuration of the SLSA subsystem
• Describe the reasons for changing an Accesslist

3.11 Describe OSI subsystem configuration
• Identify the configuration of the OSI subsystem

4) Network Troubleshooting (25%)

4.1 Describe Expand troubleshooting
• Verify processes using SCF
• Describe Expand network problems
• Describe multi-CPU path problem resolution
• Describe Expand-IP problem resolution
• Describe the Expand-ATM path problem

4.2 Describe ServerNet Cluster troubleshooting
• Identify the troubleshooting steps for SNETMON process
• Identify the troubleshooting steps for SANMAN process
• Describe the process to identify ServerNet Cluster alarms
• Describe methods of troubleshooting ServerNet Cluster switch problems

4.3 Describe SWAN and AWAN subsystem troubleshooting
• Identify the SCF command to find the current Status of the clip
• Identify the SCF command to configure the correct Track-ID
• Identify the method to load the factory default configuration
• Describe the use of the GUI or CLI tool

4.4 Describe WAN subsystem troubleshooting
• Identify processes in the WAN subsystem
• Identify Profile parameters associated with protocols
• Describe SNAX problem resolution
• Describe X.25 problem resolution

4.5 Describe LAN troubleshooting
• Describe the use of TCP/IP utilities
• Describe making and analyzing traces
• Describe the use of Defines and Param
• Describe the process of analyzing Token Ring problems
• Describe the process of analyzing Fast Ethernet problems
• Describe the process of analyzing Ethernet problems

Exam Preparation Guide: Exam HP0-761 6
NonStop Advanced Networking and Communications – Level 2

4.6 Describe PAM subsystem troubleshooting
• Identify processes associated with TRSA or OSI subsystems
• Identify management interfaces used with the PAM process
• Identify EMS messages associated with the PAM subsystem

4.7 Describe ATM subsystem troubleshooting
• Identify the steps required to configure ATM connections
• Identify the relationships between ATM SCF objects and ATM adapter
• Discuss the ATM Line attributes
• Identify EMS messages associated with the ATM subsystem

4.8 Describe tools, utilities, and commands used in troubleshooting
• Identify how to determine the current object and version
• Describe available tools to test the SWAN concentrator
• Describe the use of WanWizard log to obtain error information
• Describe the procedure to update the firmware in a SWAN concentrator
• Describe how to obtain message information

5) Network Management (16%)

5.1 Describe network access administration
• Describe management of telnet access to S-series system
• Describe how to identify unauthorized network users
• Describe how to control network access
• Describe how to restrict application access
• Describe how to manage SNMP traps and SET access

5.2 Describe network management tool usage
• Describe how to manage SWAN
• Describe how to manage AWAN
• Describe automation of LAN and WAN subsystems
• Describe how to use SCF to manage LAN and WAN subsystems
• Describe how to use NSX or ASAP to manage an EXPAND network

5.3 Describe network performance and tuning techniques
• Describe how to perform SWAN performance tuning
• Describe Expand performance tuning
• Describe role of network tuning

5.4 Describe network security options
• Describe how to restrict a telnet service
• Describe how to implement remote password
• Describe how to restrict FTP access

Exam Preparation Guide: Exam HP0-761 7
NonStop Advanced Networking and Communications – Level 2

5.5 Describe address allocation and management
• Identify the use of DNS for TCP/IP
• Identify the use of subnet and router address for TCP/IP
• Identify the use of Hostfile for TCP/IP
• Identify the use of NETID, port number, and host address for X.25
• Identify the use of optional MAC address
• Identify the method for TCP/IP port assignment

5.6 Describe Enterprise network management
• Identify the system requirements for enterprise network management
• Describe the SNMP agent configuration (for unique system)
• Describe the TCP/IP subagent configuration (for unique system)
• Describe the forwarding of EMS events to a network management platform
• Describe the function of the SNMP trap multiplexor (SWAN)

Exam Preparation Guide: Exam HP0-761 8
NonStop Advanced Networking and Communications – Level 2

Related Training and Study References

The NonStop Systems Certification (Level 2) includes references to a variety of materials
that provide information included on this certification exam. Completion of courses and review of materials is recommended, but not required, for success on this exam.

Recommended Minimum Courses

Course Title Part Number Type Length
NonStop S-Series Communications Products U4166S ILT 10 days
NonStop S-Series TCP/IP System Management U4176S ILT 5 days

Additional Highly Recommended Courses
Check web site course descriptions for prerequisites

Course Title Part Number Type Length
Data Communications Concepts U4149S ILT 5 days
NonStop S-Series Field Support Training U4170S ILT 10 days
NonStop S-Series ServerNet Cluster Workshop U4174S ILT 3 days

ILT = Instructor-Led Training

Check web site course descriptions for prerequisites at: http://education.hp.com/curr-nonstop.htm (Instructor-Led Training) http://education.nonstop.compaq.com/us/cat/httoc.htm (Self-Study Training)

Additional Recommended Reference Materials for This Exam

References to the majority of questions found in this exam can be found in manuals contained in the Online TIM collections (This guide typically references the latest release available in the TIM Document Collection). TIM (Total Information Manager) is a single interface to all NonStop Systems documentation and support information.

External users must subscribe to the TIM CD collection. See your NonStop Representative for more information.

NOTE: TIM must be installed on your system before using the following default access settings.

External: http://www.hp.com/go/ntl

Exam Preparation Guide: Exam HP0-761 9
NonStop Advanced Networking and Communications – Level 2

Documentation
The references below are based on information available as of April 2001. Information nested (~) and in quotation marks (“) indicates subsections emphasized in the document.

• 6773 Common Communications ServerNet Adapter Manual (420079-001)
• ASAP Server Manual, (422770-001) “Introduction to availability Statistics and Performance”
• ATM Adapter Installation and Support Guide (420013-001)
• ATM Configuration and Management Manual (422840-001)
~ Alter Line
~ Create and Start ATM Adapter
~ Create and Start ASM Process
~ ATM Manager Process
• Availability Guide for Application Design (124511)
• AWAN 3883/3884/3885 Access Server Configuration and Management Manual (424242-
001)
• AWAN 3886 Server Installation and Configuration Guide (427428-001)
• ESCON Connect User Guide (422841-001) “Hardware Installation”
• Ethernet Adapter Installation and Support Guide (425684-001)
• Expand Configuration and Management Manual (425827-001)
~ Expand overview
~ Congestion Control
~ Configuring Expand-Over-IP Lines
~ Configuring Expand-Over-FOX Lines
~ Configuring Expand-Over Direct-Connect or Satellite Connect Lines
~ Subsystem Control Facility
• Expand Network and Troubleshooting Guide (425828-001)
~ Resolving Common Network Problems
~ $NCP Problems
~ LISTDEV Command
~ Expand over IP Problems
~ Expand over ATM Problems
~ Identifying Network Problems
~ Multi-CPU Path Problems
~ Common Multi-CPU Problems
• GO6.10 – Software Installation and Upgrade Guide (427479-001)
• G-Series Highlights and Migration Planning Guide (427402-001)
• Guardian Programmer’s Guide (421922-001)
• S-Series Cluster Switch Hardware Install and Support Guide (426921-001)
• S-Series Fastpath Guide (425760-001) “Troubleshooting and Expand over-IP Connection”
• S-Series Hardware Support Guide (427200-001) “Viewing Events”
• S-Series Planning and Configuration Guide (427199-001)
~ Dedicated LANs
~ Multiple TSM Workstations Managing Multiple Systems
• Introduction to Networking for Compaq NonStop? S-Series Servers (426889-001)
• Introduction to NonStop? Operations Management (125507)
• Introduction to SNA Capabilities of Tandem NonStop? Systems (134597)
• LAN Configuration and Management Manual (425686-001) “Introduction to SLA subsystem”
• Measure GUI User’s Guide (140072) “The Measurement Configuration”

Exam Preparation Guide: Exam HP0-761 10
NonStop Advanced Networking and Communications – Level 2

• PAM Configuration and Management Manual (142480)
~ DSM Facilities
~ Distributed System Management Interface
~ PAM and TLAM Object Comparison
• OSI/AS and OSI/TS Supplement (107751) includes RFC-1006 Support
• OSI/AS Configuration and Management Manual (424119-001) “Troubleshooting Guide, NSP Process: PAM”
• OSI/AS SCF Reference Manual (424121-001) “SU Object”
• QIO Configuration and Management Manual (424717-001)
• SCF Reference Manual for G-Series Releases (135084)
• ServerNet Cluster Manual (425019-001)
~ Planning for Installation
~ ServerNet Cluster Description
~ ServerNet Cluster Description
• ServerNet Cluster Manual (427410-001)
~ Troubleshooting SANMAN
~ Troubleshooting SNETMON
~ Troubleshooting the Cluster Tab in the TSM Service Application
~ Using TSM Alarm
• ServerNet/FX Adapter Configuration and Management (422795-001) “Configuring the
ServerNet Adapter Subsystem”
• SNAX/XF and SNAX/APN Configuration and Management Manual (425836-001)
• SNMP Configuration and Management Manual (142624)
~ MIBS Supported by the NonStop Agent
~ EMS Trap Subagent
~ The NonStop SNMP Environment
• SWAN Concentrator Installation and Support Guide (424815-001) “Updating the SWAN Kernel Firmware”
• SWAN Concentrator and WAN Subsystem Troubleshooting Guide (426992-001)
~ Finding the VPROC of the FIRMWARE
~ SCF Command
• Tandem Network Statistics Extended (134550)
• Tandem NonStop TCP Applications User Guide (117469) “FINGER, Displaying Network
User Information”
• TCP/IP (Parallel Library) Configuration and Management Manual (427502-001)
“Introduction”
• TCP/IP (Parallel Library) Migration Guide (427650-001)
• TCP/IP Configuration and Management Manual (140771) “SCF Interface to Tandem
NonStop TCP/IP”
• TCP/IP and IPX/SPX Programming Manual (426001-001) “Library Routines”
• TELSERV Manual (427174-001)
• Token-Ring Adapter Installation and Support Guide (426955-001) “Overview of the TRSA”
• TSM Configuration Guide (427409-001) “TSM Version 9-0, Dial-In Scenario”
• TSM Online User Guide (427509-001) “Actions and Requires Applications”
• WAN Subsystem Configuration and Management Manual (426850-001)
• X25AM Configuration and Management Manual (424910-001)
• X25AM Management Programming Manual (065306) “ITI Application”

Exam Preparation Guide: Exam HP0-761 11
NonStop Advanced Networking and Communications – Level 2

Exam Preparation Guide: Exam HP0-761 12
NonStop Advanced Networking and Communications – Level 2
HP Certified Professional Program—Practice Exam
NonStop™ Server Advanced Networking and Communications
(Exam 010-761)
43 Questions

1. In a S74004 system, the LANMAN monitor process runs in the following CPU location(s)
A. CPU 0
B. CPU 0 and 1
C. Every CPU
D. The adapter’s primary CPU

2. In the SLSA subsystem, what are the three immediate subordinates to the LANMAN
process?
A. Adapter, SAC, Monitor B. Adapter, LIF, Monitor C. Adapter, LIF, SAC
D. Monitor, SAC,LIF

3. Which of the following is a single port connection for the Ethernet E4SA adapter. A. Data Transfer Interface
B. Diagnostic Subsystem Interface (SMB) C. 10Base-T interface
D. Power Interface

4. What protocols require a PAM process for TokenRing connectivity? A. SNAX/APN, SNAX/XF and IPX/SPX
B. SNAX /APN and SNAX/XF C. TCP/IP and IPX/SPX
D. SNAX/APN, SNAX/XF and TCP/IP

5. What is the correct Oject Hierarchy for the QIO subsystem
A. Subsys, Mon, Queue, Application B. Subsys, Queue, Mon, Application C. Subsys, Mon, Application, Queue D. Subsys, Application, Mon, Queue

6. What hardware components support the ATP6100 protocol? A. The SWAN concentrator only
B. The AWAN access server only
C. The SWAN concentrator and the AWAN access server with optional GAP software
D. The AWAN access server using optional GAP software only

NonStop Server Advanced Networking and Communications (Exam 010-761)

7. Which components need to be installed in a secondary LU (SLU) in a SNAX/APN End Node configuration that requires initiating a session to a primary LU (PLU) elsewhere in the network?
A. SNAX/CM and SNAX Creator-2
B. TLOGMGR and ILOGMGR using Enhanced logon facility (ELF) C. SNAX Creator-2 and TLOGMGR
D. TLOGMGR and ILOGMGR using Extended Logon Facility (XLF)

8. The ServerNet Cluster Switch achieves a highly fault tolerant solution due to it’s
A. Support for variety of cable media
B. Two ServerNet II switches for X and Y fabrics
C. Use for ring topology configurations
D. Use of a star topology configuration

9. When writing an application that will use SNA LU-LU session type 0, what application programmatic interface should be used?
A. SNAX/APC B. SNAX/HLS
C. EXCHANGE/SNA D. SNAX/CPI-C

10. What sensitive command in SCF can be executed only by a user in the SUPER group
(255,*).
A. CHECK B. ALLOW
C. LISTOPENS D. CLEAR

11. What Simple Network Management Protocol MIB-II object identifies the NonStop server to an SNMP manager as ‘NonStop Kernel system Version: Gxx’?
A. sysDescr
B. hostVersion C. sysOstype D. hrSystem

12. What product should be selected for a transaction oriented communication link in an SNA
environment?
A. SNAX/APC
B. EXCHANGE/SNA C. SNAX/CMN
D. EM3270

13. What does the Installation Document Checklist provide
A. A full inventory of all Hardware and Software components to be installed on the S- series system
B. A list of all documents associated with the installation of the system
C. Details of the requirements for the system installation
D. A checklist of hardware components only

NonStop Server Advanced Networking and Communications (Exam 010-761)

14. During initial installation which file to configure and test an S-Series system
A. $system.sys00.confbase
B. $system.zsysconf.config
C. $system.zsysconf.conf0000
D. $system.sys00.scf0000

15. Customer would like to add the fourth server to their ServerNet FX ring online. From the list below, which step would you perform first.
A. Physically insert the new Cluster
B. SCF stop the LBU’s on the neighbors
C. Create and start the EXPAND LH process
D. Disconnect the Neighbors LBU’s
E. Physically disconnect neighbor’s cables

16. What are required to configure multi-CPU EXPAND line handler in a multi-CPU EXPAND PATH? (select two answers)
A. SUPERPATH ON B. MULTICPU ON
C. All EXPAND line handlers have to be in the same CPU pair
D. All EXPAND line handlers can be in different cpu pair
E. SPEEDK

17. What configurations are required to configure Expand over HDLC between two systems without using any modem or modem eliminator? (Select two answers)
A. Both have to use CLOCKMODE_DCE B. One system uses CLOCKMODE_DTE C. CLOCKSPEED
D. SPEED
E. INTERFACE
F. Both have to use CLOCKMODE_DTE

18. Which configuration is required for having more than one TCP/IP subsystem sharing a
E4SA or FESA port?
A. There is no special consideration for configuration as long as only a maximum of 8
TCP/IP processes per E4SA or FESA port.
B. One subnet of first TCP/IP process has to be configured with GATEWAY ON
C. Other subnets of other TCP/IP processes must be configured with GATEWAY ON
D. As long as all subnets of all TCP/IP processes are using the same subnetmask

NonStop Server Advanced Networking and Communications (Exam 010-761)

19. What AWAN configuration is required for a SPOOLER and FASTPTCP printing to a printer connected to AWAN?
A. Change telnet listener 200n port n
B. Change port n awan fastp
C. Change port n speed 19200 char 8 parity even
D. Change port n default protocol telnet

201. The 3890 ES Connect controller physically resides in which system type? A. IBM ES-9000 system
B. Compaq Proliant NT Server
C. Compaq Integrity Series Server
D. Compaq ServerS-series Server

21. How to configure the Hostname and Hostid with Parallel Library TCP/IP?
A. TCPMAN; ALTER MON *,HOSTNAME “ABC ” ; ALTER MON *,HOSTID
150.50.130.2
B. TCPMAN; ALTER PROCESS *,HOSTNAME “ABC ” ; ALTER MON *,HOSTID
150.50.130.2
C. TCPSAM; ALTER PROCESS *,HOSTNAME “ABC ” ; ALTER MON *,HOSTID
150.50.130.2
D. TCPMON; ALTER MON *,HOSTNAME “ABC ” ; ALTER MON *,HOSTID
150.50.130.2

22. Which statement is correct for Ethernet failover with Parallel Library TCP/IP?
A. Allow both TCP and UDP sessions to continue operating if there is a cabling or adapter failure.
B. Parallel Library TCP/IP Ethernet failover requires one of the LIFs to act as a “hot standby” in anticipation of a failure.
C. Shared IP provides a bandwidth advantage for only outbound traffic. D. Non-shared IP cannot provide extra bandwidth for outbound traffic.

23. A customer wants to setup TCP/IP over X.25. What configuration is required for both X.25 line and TCP/IP process?
A. X.25 : ADD LINE with SRCADDR “IP address”;
1 to 32 SU with PROTOCOL NAM TCP/IP: ADD SUBNET with TYPE SNAP and
DEVICENAME
B. X.25 : ADD LINE with SRCADDR “IP address in DDN format”;
1 to 32 SU with PROTOCOL PTP
TCP/IP: ADD SUBNET with TYPE X25 and DEVICENAME C. X.25 : ADD LINE with SRCADDR “IP address in DDN format”;
1 to 32 SU with PROTOCOL PTP TCP/IP: ADD SUBNET with TYPE SNAP and
DEVICENAME
D. X.25 : ADD LINE with SRCADDR “IP address”;
1 to 32 SU with PROTOCOL PTP TCP/IP: ADD SUBNET with TYPE X25 and
DEVICENAME

NonStop Server Advanced Networking and Communications (Exam 010-761)

24. What subsystem is required for configuring OSI/TS over LAN using E4SA port? A. TCP/IP
B. PAM
C. PAM and TCP/IP D. SLSA

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

25. EMS Message “Network Request Aborted” indicates which of the following has occurred to a Expand multi-CPU path configuration?
A. The line was reset and went down
B. The path was reset and went down
C. Expand LH process pair ownership changed
D. Remote node has been reset

26. The following exhibit is an example of which SCF command? A. info process $NCP,lineset
B. status process $NCP, lineset
C. info process $NCP,netmap
D. status process $NCP,netmap

27. What is the ServerNet Manager process name? A. $ZZKRN.#ZZSCL
B. $ZZKRN.#MSGMON C. $ZZKRN.#ZZSMN
D. $ZZKRN.#SNTMAN

28. The name of a SWAN adapter is S34. Which SCF command determines the state of Clip 2?
A. info adapter $zzwan.s34.2
B. status adapter $zzwan.s34.2
C. status server $zzwan.s34.2
D. info server $zzwan.2.s34

29. You are setting up a SNAX communications link, $SNAP1, to a bank and due to a late specification change REJ frames are not to be used. What is the appropriate SCF command to disable REJ frames?
A. ALTER DEVICE $ZZWAN.#SNAP1, RESET RJE B. ALTER LINE $SNAP1,REJ
C. ALTER DEVICE $ZZWAN.#SNAP1, NOREJ D. ALTER LINE $SNAP1,REJECT OFF

30. Which record type is an example of one that can be selected via PTRACE TRACE PROCESS $ZTC0,TO TRACEFL,RECSIZE 750,SELECT SOCKCMD ?
A. Queue Length Record
B. Destination IP Address Record
C. Packet For Us Record
C. Receive State Change Record

NonStop Server Advanced Networking and Communications (Exam 010-761)

31. An SCF STATUS LINE $ABC,DETAIL command displays “connecting” in the detailed state field. Which SCF commands would you use to analyze the problem? Select two.
A. STATS LINE $ABC,DETAIL B. PROBE LINE $ABC,DETAIL C. INFO LINE $ABC, DETAIL
D. STATS LINE $ABC,RESET E. INFO LINE $ABC,SUB ALL

32. The PAM subsystem provides which Port type ? A. SNAP
B. TR8025
C. IPX8023
D. LLC1

33. An ATM Adapter fails with an Internal Error, with Autodump enabled. The Adapter will Dump
to the following $SYSTEM.SYSnn location. A. C8168D00
B. C7838D00
C. C7953D00
D. C6030D00

34. Which command do you use to configure a telnet service which is hidden and not available with the telnet service menu?
A. ADD WINDOW #ABC, SERVICENAME “”
B. ADD WINDOW #ABC, SERVICENAME “ABC” C. ADD WINDOW #ABC, NOMENU
D. ADD WINDOW #ABC, SERVICENAME NONE

35. Which command is used to configure a telnet SU window which supports applications that must keep the context of the previous session when the client reconnects?
A. ADD WINDOW #ABC, SERVICENAME “”
B. ADD WINDOW #ABC, SERVICENAME “ABC” C. ADD WINDOW #ABC, SERVICETYPE BLOCK D. ADD WINDOW #ABC, SERVICENAME NONE

36. What tool is used to config a 6530 terminal port with AWAN 3886? A. GUI
B. CLI
C. GUI or CLI D. RAS

37. What SCF command is used to display the clip code running in a clip? A. STATUS TASK
B. INFO TASK
C. STATUS SERVER D. INFO SERVER

NonStop Server Advanced Networking and Communications (Exam 010-761)

38. What optional parameter has to be configured in order for CONGESTION CONTROL
function to work properly? A. OSTIMEOUT B. L4TIMEOUT
C. OSSPACE D. L4RETRIES

39. A user complains that he is able to get access to the FTP server of the Serversystem, which should not be allowed, and he worries about the security of the system. What should you
check?
A. Verify FTPUSERS file and make sure it contains that user name
B. Verify FTPUSERS file and make sure it contains only SUPER.SUPER user name
C. SAFEGUARD FTPSERV program file for SUPER.SUPER access only
D. Modify PORTCONF with FTPSERV running in a different port number

40. How can access be restricted to the FTP SERVER on a Serversystem? A. Delete FTPUSERS file
B. Stop LISTNER process
C. Modify PORTCONF file with no entry for FTPSERV program
D. Safeguard FTPSERV program file for SUPER.SUPER only

41. What is required for a X.25 client to connect to an application with a static X.25 SU?
A. PORT NUMBER B. HOST ADDRESS C. NETID
D. NETID and PORT NUMBER

42. What configuration is required for a Serversystem ($ZTC0 10.20.10.10) to be managed by a
SNMP Manager?
A. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.20.10.10″
B. ADD ENDPOINT $agent-process, network $ZTC0, HOSTADDR “10.10.10.10″
C. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.20.10.10″
D. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.10.10.10″, COMMUNITY “Tandem”

43. Long question and short answer
Which statement is correct for TCP/IP Subagent?
A. The SNMP Agent receives and authenticates SNMP request messages regarding TCP/IP resources and forwards authenticated requests to the TCP/IP Subagent with which it is communicating.
B. The TCP/IP Subagent performs no further authentication of SNMP requests forwarded to it by the SNMP Agent.
C. The TCP/IP Subagent receives and authenticates SNMP request messages regarding TCP/IP resources and forwards to the SNMP Agent with which it is communicating.
D. The TCP/IP Subagent perform authentication of SNMP requests forwarded to it by the SNMP Agent.

NonStop Server Advanced Networking and Communications (Exam 010-761)

HP Certified Professional Program
Feedback for Practice Exam
NonStop™ Server Advanced Networking and Communications
(Exam 010-761)
43 Questions—Correct answers in Bold

Objective: (761.1.1) Describe the S-series LAN connectivity
Item: 761.1.1.a.1

1. In a S74004 system, the LANMAN monitor process runs in the following CPU location(s)
A. CPU 0
B. CPU 0 and 1
C. Every CPU
D. The adapter’s primary CPU

References: LAN Configuration and Management Manual 425686-00, Introduction to SLSA Subsystem

Objective: (761.1.1) Describe the S-series LAN connectivity
Item: 761.1.1.d.1

2. In the SLSA subsystem, what are the three immediate subordinates to the LANMAN
process?
A. Adapter, SAC, Monitor B. Adapter, LIF, Monitor C. Adapter, LIF, SAC
D. Monitor, SAC,LIF

References: Server S-Series Communications Product Manual, Module 3.1

Objective: (761.1.1) Describe the S-series LAN connectivity
Item: 761.1.1.f.1

3. Which of the following is a single port connection for the Ethernet E4SA adapter. A. Data Transfer Interface
B. Diagnostic Subsystem Interface (SMB)
C. 10Base-T interface
D. Power Interface

References: Ethernet Adapter Installation and Support Guide 425684-001, page 1-4

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.1.1) Describe the S-series LAN connectivity
Item: 761.1.1.g.1

4. What protocols require a PAM process for TokenRing connectivity? A. SNAX/APN, SNAX/XF and IPX/SPX
B. SNAX /APN and SNAX/XF
C. TCP/IP and IPX/SPX
D. SNAX/APN, SNAX/XF and TCP/IP

References: Token-Ring Adapter Installation and Support Guide – 426955-001 page 1-7
Objective: (761.1.1) Describe the S-series LAN connectivity
Item: 761.1.1.q.1

5. What is the correct Oject Hierarchy for the QIO subsystem
A. Subsys, Mon, Queue, Application
B. Subsys, Queue, Mon, Application
C. Subsys, Mon, Application, Queue
D. Subsys, Application, Mon, Queue

References: QIO Configuration and Management Manual, 474717-001, Page 1-6

Objective: (761.1.2) Describe the S-series WAN connectivity
Item: 761.1.2.d.1

6. What hardware components support the ATP6100 protocol? A. The SWAN concentrator only
B. The AWAN access server only
C. The SWAN concentrator and the AWAN access server with optional GAP
software
D. The AWAN access server using optional GAP software only

References: G-Series Highlights and Migration Planning Guide – 427402-001 page 3-12

Objective: (761.1.2) Describe the S-series WAN connectivity
Item: 761.1.2.l.1

7. Which components need to be installed in a secondary LU (SLU) in a SNAX/APN End Node configuration that requires initiating a session to a primary LU (PLU) elsewhere in the network?

A. SNAX/CM and SNAX Creator-2
B. TLOGMGR and ILOGMGR using Enhanced logon facility (ELF) C. SNAX Creator-2 and TLOGMGR
D. TLOGMGR and ILOGMGR using Extended Logon Facility (XLF)

References: SNAX/XF and SNAX/APN Configuration and Management Manual – 425836-
001, page 7-1

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.1.3) Describe the S-Series intersystem connectivity
Item: 761.1.3.i.1

References: ServerNet Cluster Manual – 425019-001, ServerNet Cluster Description, entire section

Objective: (761.1.4) Discuss the application interface for the NonStop communications
subsystems
Item: 761.1.4.b.1

9. When writing an application that will use SNA LU-LU session type 0, what application programmatic interface should be used?
A. SNAX/APC
B. SNAX/HLS
C. EXCHANGE/SNA D. SNAX/CPI-C

References: Introduction to SNA Capabilities of NonStop Systems -134597 page 4-2

Objective: (761.1.5) Discuss the network management interfaces and tools
Item: 761.1.5.e.1

10. What sensitive command in SCF can be executed only by a user in the SUPER group
(255,*).
A. CHECK
B. ALLOW
C. LISTOPENS D. CLEAR

References: SCF Reference Manual for G-Series Releases, 135084, page 5-16

Objective: (761.2.1) Identify the system and network connectivity requirements
Item: 761.2.1.d.1

References: SNMP Configuration and Management Manual – 142624, MIBs Supported by the
NonStop Agent, page 7-3

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.2.2) Describe formulation of a network design
Item: 761.2.2.b.1

12. What product should be selected for a transaction oriented communication link in an SNA
environment?
A. SNAX/APC
B. EXCHANGE/SNA C. SNAX/CMN
D. EM3270

References: Introduction to Networking for NonStop S-Series Servers-426889-001, page 7-3

Objective: (761.2.3) Describe a network installation plan.
Item: 761.2.3.c.1

References: ServerS-Series Planning and Configuration Guide 424861-001, 13-3,

Objective: (761.2.3) Describe a network installation plan.
Item: 761.2.3.g.1

14. During initial installation which file to configure and test an S-Series system
A. $system.sys00.confbase
B. $system.zsysconf.config
C. $system.zsysconf.conf0000
D. $system.sys00.scf0000

References: ServerS-Series Fastpath guide 425760-001, page b-3
Objective: (761.2.3) Describe a network installation plan.
Item: 761.2.3.j.1

References: ServerNet/FX Adapter Configuration and Management Manual 422795-001, Section 2, Add S-Series Server to a Fox Ring

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.3.3) Describe Expand subsystem configuration
Item: 761.3.3.c.1

16. What are required to configure multi-CPU EXPAND line handler in a multi-CPU EXPAND PATH? (select two answers)
A. SUPERPATH ON
B. MULTICPU ON
C. All EXPAND line handlers have to be in the same CPU pair
D. All EXPAND line handlers can be in different cpu pair
E. SPEEDK

References: EXPAND Configuration and Management Manual 425827-001, Configuring
Multiline Paths

Objective: (761.3.3) Describe Expand subsystem configuration
Item: 761.3.3.k.1

17. What configurations are required to configure Expand over HDLC between two systems without using any modem or modem eliminator? (Select two answers)
A. Both have to use CLOCKMODE_DCE
B. One system uses CLOCKMODE_DTE C. CLOCKSPEED
D. SPEED
E. INTERFACE
F. Both have to use CLOCKMODE_DTE

References: EXPAND Configuration and Management Manual 425827-001, Expand
Overview

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.3.4) Describe TCP/IP subsystem configuration
Item: 761.3.4.a.1
18. Which configuration is required for having more than one TCP/IP subsystem sharing a
E4SA or FESA port?
A. There is no special consideration for configuration as long as only a maximum of 8
TCP/IP processes per E4SA or FESA port.
B. One subnet of first TCP/IP process has to be configured with GATEWAY ON
C. Other subnets of other TCP/IP processes must be configured with GATEWAY ON
D. As long as all subnets of all TCP/IP processes are using the same subnetmask

References: TCP/IP Configuration and Management Manual 425665-001, Configuring
Parallel Library TCP/IP for Complex and Heavy-Use Environments

Objective: (761.3.5) Describe WAN subsystem configuration
Item: 761.3.5.c.1

References: Awan 3886 Server Installation and Configuration Guide 427428-001, Setting up the AWAN 3886 Server for 6530 Support, Configuring AWAN 3886 and FASTPTCP on the NonStop Kernel Host
Awan 3883/4/5 Access Server Configuration and Management Manual 424241-
001

Objective: (761.3.6) Describe SNAX subsystem configuration
Item: 761.3.6.e.1

20. The 3890 ES Connect controller physically resides in which system type? A. IBM ES-9000 system
B. Compaq Proliant NT Server
C. Compaq Integrity Series Server
D. Compaq ServerS-series Server

References: Introduction to Networking for NonStop ServerS-series servers, Section 7-11
ES Connect

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.3.7) Describe Parallel TCP/IP subsystem configuration
Item: 761.3.7.a.1

References: TCP/IP (Parallel Library) Configuration and Management Manual 425665-001, Configuration Quick Start

Objective: (761.3.7) Describe Parallel TCP/IP subsystem configuration
Item: 761.3.7.g.1

References: TCP/IP (Parallel Library) Configuration and Management Manual 425665-001

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.3.8) Describe X.25 subsystem configuration
Item: 761.3.8.d.1

References: TCP/IP Configuration and Management Manual425665-001

Objective: (761.3.10) Describe OSI subsystem configuration.
Item: 761.3.10.c.1

24. What subsystem is required for configuring OSI/TS over LAN using E4SA port? A. TCP/IP
B. PAM
C. PAM and TCP/IP D. SLSA

References: OSI/AS Configuration and Management Manual 424119-001, Introduction, G- Series and D-Series Compatibility
Objective: (761.4.1) Describe Expand troubleshooting
Item: 761.4.1.a.1

25. EMS Message “Network Request Aborted” indicates which of the following has occurred to a Expand multi-CPU path configuration?
E. The line was reset and went down
F. The path was reset and went down
C. Expand LH process pair ownership changed
D. Remote node has been reset

References: Expand Network Management and Troubleshooting Guide 425828-001, Troubleshooting, Common Multi-CPU problems.

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.4.1) Describe Expand troubleshooting
Item: 761.4.1.d.1

26. The following exhibit is an example of which SCF command? A. info process $NCP,lineset
B. status process $NCP, lineset C. info process $NCP,netmap D. status process $NCP,netmap

References: Expand Network Management and Troubleshooting Guide 425828-001, Troubleshooting, Resolving Common Network Problems

Objective: (761.4.2) Describe ServerNet Cluster troubleshooting
Item: 761.4.2.a.1

27. What is the ServerNet Manager process name? A. $ZZKRN.#ZZSCL
B. $ZZKRN.#MSGMON
C. $ZZKRN.#ZZSMN
D. $ZZKRN.#SNTMAN

References: SERVERNET Cluster Manual 520575-002, Section 6: Troubleshooting the
Cluster tab in the TSM Service Application

Objective: (761.4.3) Describe SWAN and AWAN subsystem troubleshooting
Item: 761.4.3.a.1

References: SWAN Concentrator Installation and Support Guide-424815-001, Page 2-43

Objective: (761.4.5) Describe WAN subsystem troubleshooting
Item: 761.4.5.f.1

29. You are setting up a SNAX communications link, $SNAP1, to a bank and due to a late specification change REJ frames are not to be used. What is the appropriate SCF command to disable REJ frames?
A. ALTER DEVICE $ZZWAN.#SNAP1, RESET RJE
B. ALTER LINE $SNAP1,REJ
C. ALTER DEVICE $ZZWAN.#SNAP1, NOREJ D. ALTER LINE $SNAP1,REJECT OFF

References: SNAX/XF and SNAX/APN Configuration and Management Manual-422636-001, Page 2-9

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.4.6) Describe LAN troubleshooting
Item: 761.4.6.d.1

References: TCP/IP Configuration and Management Manual, 140771, Page 4-145

Objective: (761.4.6) Describe LAN troubleshooting
Item: 761.4.6.g.1

31. An SCF STATUS LINE $ABC,DETAIL command displays “connecting” in the detailed state field. Which SCF commands would you use to analyze the problem? Select two.

A. STATS LINE $ABC,DETAIL B. PROBE LINE $ABC,DETAIL C. INFO LINE $ABC, DETAIL
D. STATS LINE $ABC,RESET E. INFO LINE $ABC,SUB ALL

References: Himalaya S-Series Fast Path Guide 520341-001, Section A Troubleshooting an
Expand-over-IP-connection.

Objective: (761.4.7) Describe PAM subsystem troubleshooting
Item: 761.4.7.b.1

32. The PAM subsystem provides which Port type ? A. SNAP
B. TR8025
C. IPX8023
D. LLC1

References: PAM Configuration and Management Manual 523349-001, Section A PAM and
TLAM Object Comparison

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.4.8) Describe ATM subsystem troubleshooting
Item: 761.4.8.f.1

33. An ATM Adapter fails with an Internal Error, with Autodump enabled. The Adapter will Dump
to the following $SYSTEM.SYSnn location. A. C8168D00
B. C7838D00
C. C7953D00
D. C6030D00

References: ATM Configuration and Management Manual 522307-001, Section 3, Add
Adapter

Objective: (761.5.1) Describe network access administration
Item: 761.5.1.a.1

References: TELSERV Manual – 427174-001, page 5-7

Objective: (761.5.1) Describe network access administration
Item: 761.5.1.b.1

References: TELSERV Manual – 427174-001, page 4-12

Objective: (761.5.2) Describe network management tool usage
Item: 761.5.2.c.1

36. What tool is used to configure a 6530 terminal port with AWAN 3886? A. GUI
B. CLI
C. GUI or CLI D. RAS

References: AWAN 3886 Server Installation and Configuration Manual 427428-001, Introduction to the AWAN 3886 Server, Special 3886 AWAN Features

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.5.2) Describe network management tool usage
Item: 761.5.2.f.1

37. What SCF command is used to display the clip code running in a clip?
A. STATUS TASK
B. INFO TASK
C. STATUS SERVER D. INFO SERVER

References: WAN Subsystem Configuration and Management Manual – 426850-001 Page
6-84

Objective: (761.5.3) Describe network performance and tuning techniques.
Item: 761.5.3.c.1

38. What optional parameter has to be configured in order for CONGESTION CONTROL
function to work properly? A. OSTIMEOUT B. L4TIMEOUT
C. OSSPACE D. L4RETRIES

References: Expand Configuration and Management manual, page 17-71

Objective: (761.5.4) Describe network security options.
Item: 761.5.4.c.1

Verify technical details.
39. A user complains that he is able to get access to the FTP server of the Serversystem, which should not be allowed, and he worries about the security of the system. What should you
check?
A. Verify FTPUSERS file and make sure it contains that user name
B. Verify FTPUSERS file and make sure it contains only SUPER.SUPER user name
C. SAFEGUARD FTPSERV program file for SUPER.SUPER access only
D. Modify PORTCONF with FTPSERV running in a different port number

References: Nonstop TCP/IP Applications User Guide 427639-001, Communicating with the
FTP Server, Disallowing Logons

Objective: (761.5.4) Describe network security options.
Item: 761.5.4.d.1

References: Nonstop TCP/IP Applications User Guide 427639-001, Communicating with the
FTP Server, Disallowing Logons

NonStop Server Advanced Networking and Communications (Exam 010-761)

Objective: (761.5.5) Describe address allocation and management
Item: 761.5.5.d.1

41. What is required for a X.25 client to connect to an application with a static X.25 SU?
A. PORT NUMBER B. HOST ADDRESS C. NETID
D. NETID and PORT NUMBER

References: X25AM Configuration and Management Manual 523424-001, PTrace for the
X.25AM Subsystem

Objective: (761.5.6) Describe Enterprise network management
Item: 761.5.6.b.1

42. What configuration is required for a Serversystem ($ZTC0 10.20.10.10) to be managed by a
SNMP Manager?
A. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.20.10.10″
B. ADD ENDPOINT $agent-process, network $ZTC0, HOSTADDR “10.10.10.10″
C. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.20.10.10″
E. ADD TRAPDEST $agent-process, network $ZTC0, HOSTADDR “10.10.10.10″, COMMUNITY “Tandem”

References: SNMP Configuration and Management Manual 142624

Objective: (761.5.6) Describe Enterprise network management
Item: 761.5.6.d.1

43. Which statement is correct for TCP/IP Subagent?
A. The SNMP Agent receives and authenticates SNMP request messages regarding TCP/IP resources and forwards authenticated requests to the TCP/IP Subagent with which it is communicating.
B. The TCP/IP Subagent performs no further authentication of SNMP requests forwarded to it by the SNMP Agent.
C. The TCP/IP Subagent receives and authenticates SNMP request messages regarding TCP/IP resources and forwards to the SNMP Agent with which it is communicating.
D. The TCP/IP Subagent perform authentication of SNMP requests forwarded to it by the SNMP Agent.

References: SNMP Configuration and Management Manual 142524, The NonStop SNMP Environment

The HP HP0-761 certificates give you possibility to work in any country of the world because they are acknowledged in all countries equally. This HP HP0-761 torrent certificate helps
not only to improve your knowledge and skills, but it also helps your career, gives a possibility for qualified usage of HP HP0-761 exam products under different conditions. The
majority of companies in the sphere of information technologies require the presence of HP HP0-761 exams for the work in the company, and that makes obtaining this HP 050-649-(606a)
certificate necessary. Many IT specialists were not able to obtain the real HP HP0-761 certificate from the first attempt, which was the result of poor preparation for the
examination, using preparatory HP HP0-761 study guide of poor quality.

The PassGuide leader among the providers of HP HP0-761 preparatory materials is products such as HP HP0-761 vce pdf Braindumps, HP HP0-761 Tutorial, HP HP0-761 Exam Questions with Answers, HP HP0-761
Trainings, HP HP0-761 Test Online Simulations Course and free PDF. It obtained its leadership and trust of the users from the very beginning of its work on the HP HP0-761 training
materials market. All the HP HP0-761 value pack aids have been created by people who are personally familiar with actualtests HP HP0-761 Preparation Labs and who know all the
difficulties and popular mistakes made by those who take a HP HP0-761 . The entire material is logically composed in such a way that everything becomes easy to understand for
anyone. full download Many HP HP0-761 guides include audio and video material. It is really easy to acquire HP HP0-761 exams because of great variety of methods of payment.

pass4sure testking HP HP0-761 transcender PassGuide Testinside rapidshare 4shared links

Free down:Testkking Hp Exams
Free down:Pass4sure Hp Exams
more info:www.hpexams.com

High quality IT Certification Training Exam Questions, Study Guides and Practice Tests are in Downloadable PassGuide Testing Engine,Successful for IT Certification or Full Refund for you.Contact Us:Sales@PassGuide.com

Type	Exam Bible	New Questions & Answers	Latest Updated	Download link
PDF	All Certbible 's Exam Dumps	597	1 days ago	Available

PassGuide Training Materials & Practice Tests

Share
Delicious Digg Design Float Mixx Reddit StumbleUpon Technorati

Tags: hp

About the Author

Free Certification Exam Download has written 10018 stories on this site.

If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com

8 Comments on “HP0-761”

Trackbacks

Write a Comment

Gravatars are small images that can show your personality. You can get your gravatar for free today!

HP0-761

PassGuide Training Materials & Practice Tests

About the Author

8 Comments on “HP0-761”

Trackbacks

Write a Comment

Subscribe

Categories

Blogroll

Meta

Archives

News Categories

Site Pages