[offer] Another Wrong Answer In P4s For 70-620

The pop-up blocker is enabled on your computer. A Web site that you visit regularly uses pop-ups. You need to view the pop-ups from this Web site while maintaining the highest level of security for all other Web sites. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)I methinks the Ratsonrop is right. Look below :

Question
The pop-up blocker is enabled on your computer. A Web site that you visit regularly uses pop-ups. You need to view the pop-ups from this Web site while maintaining the highest level of security for all other Web sites. What are two possible ways to achieve this goal

Explanation
Changing your security settings to “high” in Internet Explorer will block some sites’ functionality, including the portal. To restore function, you may add these sites as trusted sites in Internet Explorer. Adding a website as a trusted site lowers your protection for that site, so adds sites conservatively.

Internet Explorer sets up the Trusted zone with a low security level to make it easier for you to do such things as download software without prompting. Add a site to this zone only if you trust that it would never cause harm to your computer. On the other hand, the Restricted zone imposes the highest security level for sites you deem untrustworthy; when you visit these sites, Internet Explorer will prompt you at every turn.

Cheers,

A. Disable the pop-up blocker.
B. Add the URL of the Web site to the list of trusted sites.
C. Add the URL of the Web site to the list of allowed sites.
D. Enable the Automatic Website Checguide option on the Phising filter.
E. Visit the Web site and select the Always allow pop-ups from this site option.

P4S says C+E.

E is correct, but the second correct answer is B.

MS Training Kit writes: [...] IE7+ does not block pop-ups from websites that are in the Local Intranet or Trusted Sites security zones [...]

It is a bit funny, that many people passed 70-620 with 1000/1000, but I haven’t found anybody, who posted this wrong question.
Did you guys answer with Trusted Sites or Allowed Sites in the exam?

QUESTION 263
You work as the application developer at Certkiller .com. You are developing a new
method that must encrypt confidential data. The method must use the Data
Encryption Standard (DES) algorithm. Your new method takes these parameters:
1. A byte array, named message, that must be encrypted by applying the DES
algorithm.
2. A key, named key, which will be used to encrypt the data.
3. The initialization vector, named iv.
Once the data is encrypted, it must be added to the MemoryStream object.
Choose the code segment which will encrypt the specified data and add it to the
MemoryStream object.
A. DES des = new DESCryptoServiceProvider();
des.BlockSize = message.Length;
ICryptoTransform crypto = des.CreateEncryptor(key, iv);
MemoryStream cipherStream = new MemoryStream();
CryptoStream cryptoStream = new CryptoStream(cipherStream,
crypto, CryptoStreamMode.Write);
cryptoStream.Write(message, 0, message.Length);
B. DES des = new DESCryptoServiceProvider();
ICryptoTransform crypto = des.CreateDecryptor(key, iv);
MemoryStream cipherStream = new MemoryStream();
CryptoStream cryptoStream = new CryptoStream(cipherStream,
crypto, CryptoStreamMode.Write);
cryptoStream.Write(message, 0, message.Length);
C. DES des = new DESCryptoServiceProvider();
ICryptoTransform crypto = des.CreateEncryptor();
MemoryStream cipherStream = new MemoryStream();
CryptoStream cryptoStream = new CryptoStream(cipherStream,

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

Actualtests.org – The Power of Knowing
crypto, CryptoStreamMode.Write);
cryptoStream.Write(message, 0, message.Length);
D. DES des = new DESCryptoServiceProvider();
ICryptoTransform crypto = des.CreateEncryptor(key, iv);
MemoryStream cipherStream = new MemoryStream();
CryptoStream cryptoStream = new CryptoStream(cipherStream,
crypto, CryptoStreamMode.Write);
cryptoStream.Write(message, 0, message.Length);
Answer: D
Explanation: Use the DesCryptoServiceProvider to create a new encryptor.Create a
CryptoStream that encrypt directly to the MemoryStream and call the Write()
method to perform the encryption.
A Uses a blocksize set to size of the entire message
B creates a decryptor instead of an encryptor.
C does not initialize the encryptor with the key and iv correctly.
QUESTION 264
You work as the application developer at Certkiller .com. You have to create a new
security policy for an application domain which must enforce the new Certkiller .com
security policy. You write the code segment to do this:
PolicyLevel policy = PolicyLevel.CreateAppDomainLevel();
PolicyStatement noTrustStatement =
new PolicyStatement(
policy.GetNamedPermissionSet(“Nothing”));
PolicyStatement fullTrustStatement =
new PolicyStatement(
policy.GetNamedPermissionSet(“FullTrust”));
You must now ensure that all loaded assemblies default to the Nothing permission
set. In addition to this, when an assembly comes from a trusted zone, your security
policy must grant the assembly the FullTrust permission set. You must create the
code groups to do this.
Choose the code segment which will achieve this objective.
A. CodeGroup group1 = new FirstMatchCodeGroup(
new ZoneMembershipCondition(SecurityZone.Trusted),
fullTrustStatement);
CodeGroup group2 = new UnionCoderoup(
new AllMembershipCondition(),
noTrustStatement);
group1.AddChild(group2);
B. CodeGroup group1 = new FirstMatchCodeGroup(
new AllMembershipCondition(),
noTrustStatement);
CodeGroup group2 = new UnionCodeGroup(

Actualtests.org – The Power of Knowing
new ZoneMembershipCondition(SecurityZone.Trusted),
fullTrustStatement);
group1.AddChild(group2);
C. CodeGroup group = new UnionCodeGroup(
new ZoneMembershipCondition(SecurityZone.Trusted),
fullTrustStatement);
D. CodeGroup group = new FirstMatchCodeGroup(
new AllMembershipCondition(),
noTrustStatement);
Answer: B
QUESTION 265
You work as the application developer at Certkiller .com. You have to define the code
segment that will transfer the data of a byte array. The byte array is named
dataToSend. Your code segment must use a NetworkStream object named
netStream when transferring the data of the byte array. The cache size you use must
be 8,192 bytes.
Which code segment should you use to accomplish the task?
A. MemoryStream memStream = new MemoryStream(8192);
memStream.Write(dataToSend, 0, (int) netStream.Length);
B. MemoryStream memStream = new MemoryStream(8192);
netStream.Write(dataToSend, 0, (int) memStream.Length);
C. BufferedStream bufStream = new BufferedStream(netStream, 8192);
bufStream.Write(dataToSend, 0, dataToSend.Length);
D. BufferedStream bufStream = new BufferedStream(netStream);
bufStream.Write(dataToSend, 0, 8192);
Answer: C
Explanation: To send data using a cache it is necessary to use a BufferedStream.
The BufferedStream should be created with the cache size of 8192 bytes.
A & B do not employ caching.
D does not correctly initialise the BufferedStream to have a cache size of 8192 bytes.
Free download:passguide Microsoft 70-620
Free download:passguide Microsoft 70-620

password:www.certbible.org

PassGuide Cisco Exams Questions & Training Materials

1. Free passguide Microsoft MB3-234
2. Free passguide Microsoft TS 70-640
3. Free passguide Microsoft TS 70-503(VB)
4. Free passguide Microsoft TS 70-643
5. Free MCTS 70-620 Exam Prep: Microsoft Windows Vista, Configuring (Exam Prep)
6. Free passguide Microsoft TS 70-544(CSharp)
7. Free passguide Microsoft TS 70-571
8. Free Passguide Microsoft 77-605 v2.73
9. Free passguide Microsoft MB3-127
10. Free passguide microsoft MB3-465 v2.73
11. Free passguide Microsoft TS 70-503(CSharp)
12. Free [offer] – CBT Nuggets – CISSP Certification