pass4sure HP0-205
- Monday, September 29, 2008, 20:34
- Cert Tests
- 0 views
- Add a comment
Supporting the Enterprise Modular Library : HP0-205 Exam
Product Description
Exam Number/Code: HP0-205
Exam Name: Supporting the Enterprise Modular Library
Questions Type: Multiple choice,
“Supporting the Enterprise Modular Library”, also known as HP0-205 exam, is a HP certification.
Preparing for the HP0-205 exam? Searching HP0-205 Test Questions, HP0-205 Practice Exam, HP0-205 Dumps?
With the complete collection of questions and answers, Pass4sure has assembled to take you through 64 questions to your HP0-205 Exam preparation. In the HP0-205 exam resources, you will cover every field and category in HP Certification helping to ready you for your successful HP Certification.
Questions and Answers : 64 questions
Updated: May 6th , 2008
QUESTION 1
What is the maximum number of partitions allowed when configuring partitions on an
EML E-Series tape library?
A. 5
B. 6
C. 7
D. 8
Answer: B
QUESTION 2
What is the hard wired IP address of the interface controller card in an EML E-Series tape library when connected to the cascade port?
A. 155.155.155.1
B. 192.168.2.1
C. 10.0.0.1
D. 1.1.1.1
Answer: B
QUESTION 3
What are the standard cabling requirements for the Interface Manager card of an EML
E-Series tape library?
A. 4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to
LAN
B. 4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x
Ethernet to LAN
C. 4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x
Ethernet to LAN
D. 4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x
Ethernet to LAN Answer: A
QUESTION 4
When configuring logical libraries from an EML E-Series tape library, mailslots_______ .
A. must be configured for each logical library
B. are optional and may or may not be configured
C. can only be configured for Data Protector
D. are configured after the logical devices are created and presented to the hosts
TK
HP0-205
Answer: B
QUESTION 5
When completing the installation process in an EML E-Series tape library, how can you verify that the Fibre Channel links are functioning properly?
A. Disconnect and reconnect the cables and check the link indicators. B. Execute the fcping diagnostic utility from the management station.
C. Power cycle the tape library and check the OCP messages.
D. Issue the “diaggetput” command from the command line interface. Answer: A
QUESTION 6
What is NOT a severity level for events on EML E-Series tape libraries?
A. information
B. critical
C. warning
D. communication
Answer: D
QUESTION 7
Which user interface is recommended to perform firmware updates on components of an
EML E-Series tape library?
A. Command View TL GUI B. Command Line Interface C. Library and Tape Tools
D. Operator Control Panel
Answer: A
QUESTION 8
When replacing a failed Ultrium tape drive in an EML E-Series tape library, the library
_______.
A. must be offline with no I/Os going to any other drives
B. must be powered off before replacing the new drive
C. automatically recognizes the new drive without rebooting
D. must be rebooted to recognize the new drive
Answer: D
TK
HP0-205
QUESTION 9
For data file sizes less than 64 KB, it is advisable to perform backups______.
A. direct access
B. snapshot
C. file-by-file
D. sequential
Answer: D
QUESTION 10
What is NOT a feature of the HP Extended Tape Library Architecture of which the HP EML E-Series library is a part?
A. provides a cost effective replacement for enterprise storage arrays B. provides an architectural platform for future library enhancements C. enables device-level security with Secure Manager access control
D. delivers complete library manageability through web and telnet interfaces
Answer: A
QUESTION 11
On which FRU component of an EML E-Series tape library do two versions of library firmware reside?
A. library robotics controller card
B. Interface Manager memory card
C. Interface Manager card
D. interface controller card
Answer: A
QUESTION 12
An EML E-Series tape library and several hosts are connected to a SAN and power is on. What must you do to gain host access to the library?
A. Nothing, as all hosts have access by default. B. Enable host access from Secure Manager.
C. Disconnect and reconnect the Fibre Channel HBAs.
D. Configure library access on the hosts and reboot them. Answer: B
QUESTION 13
Which additional components are required when you add a fifth tape drive to an EML
E-Series tape library? Select THREE.
Market Price: $159.99
Member Price: $99.99
Free download?pass4sure HP0-205Free download?testking HP0-205
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Free Certification Exam Download has written 10018 stories on this site.
If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!
