pass4sure HP0-752

ProCurve Mobility : HP0-752 Exam

Product Description
Exam Number/Code: HP0-752Exam Name: ProCurve Mobility

“ProCurve Mobility”, also known as HP0-752 exam, is a HP certification.
Preparing for the HP0-752 exam? Searching HP0-752 Test Questions, HP0-752 Practice Exam, HP0-752 Dumps?

With the complete collection of questions and answers, Pass4sure has assembled to take you through 130 Q&As to your HP0-752 Exam preparation. In the HP0-752 exam resources, you will cover every field and category in HP MASTER ASE helping to ready you for your successful HP Certification.

Questions and Answers : 130 Q&As
Updated: May 5th , 2008

Question No: 1 When does supplemental authentication occur?

A. after both the open-key 802.11 authentication and the 802.11 association are completed successfully
B. after both the shared-key 802.11 authentication and the 802.11 association are completed successfully
C. after the open-key 802.11 authentication is completed successfully but before the 802.11 association process begins
D. after the shared-key 802.11 authentication is completed successfully but before the 802.11 association process begins

Answer: A

Question No: 2 Which statement describes a closed system?

A. In a closed system, the wireless network name is encrypted in the 802.11 header.
B. In a closed system, the wireless network name cannot be detected in any 802.11 frames.
C. In a closed system, the wireless network name is not advertised in the 802.11 beacon frame.
D. In a closed system, the wireless network name is not included in the header of any 802.11 frames.

Answer: C

Question No: 3 Which statements describe 802.11a? (Select two.)

A. It interferes with 802.11b/g.
B. It requires support for 802.11h in Europe.
C. It experiences interference from microwaves. D. It has higher data rates than 802.11b.
E. It was the first adopted and most widely used standard.

Answer: B, D

Question No: 4 You configure two access points (APs) to support a single wireless LAN (WLAN). One
station associates with one AP, and one station associates with the other AP. What do the two stations have
in common?

A. wireless cell
B. service set identifier (SSID)

3

HP0-752

C. basic service set identifier (BSSID)
D. independent basic service set identifier (IBSSID)

Answer: B

Question No: 5 In which mode does the ProCurve Access Point (AP) 420 operate?

A. mixed-cell mode B. in-cell relay mode C. peer-to-peer mode D. infrastructure mode

Answer: D

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

Question No: 6 ProCurve Mobility Infrastructure Solutions help you meet the challenges posed by a wireless network (as compared to a traditional wired network). What is one of these challenges?

A. 802.11 standards do not provide any guidelines for Layer 2 roaming.
B. Studies have found that users tend to be less productive when they have mobile access to a network.
C. Multiple users connect to the network through the same access point (AP), but access must be customized for each user.
D. 802.11 standards do not provide any encryption, so you must create virtual private network (VPN) tunnels to each end station.

Answer: C

Question No: 7 What is one reason to choose ProCurve’s Wireless LAN System over its standalone AP
solution?

A. Your network requires many wireless devices that are managed from a central location. B. You need your wireless network solution to provide RADIUS services.
C. Your network requires Layer 3 roaming and advanced authentication options.
D. You want to manage your wireless network using ProCurve Manager (PCM) Plus.

Answer: A

4

HP0-752

Question No: 8 When configuring a Wireless LAN (WLAN) on the ProCurve Wireless Edge Services xl
Module, you can use Normal mode or Advanced mode. Why would you use Advanced mode, rather than
Normal mode?

A. You want to configure 16 WLANs.
B. You want to customize the transmit power for only one RP.
C. You want one WLAN to be supported on only one of the RPs.
D. You want the adopted Radio Ports (RPs) to beacon a WLAN that has an index number of 4.

Answer: C

Question No: 9 Which ProCurve Wireless LAN System feature protects your company if a Radio Port
(RP) fails?

A. redundancy group
B. network self-healing
C. interference avoidance
D. radio frequency (RF) patching

Answer: B

Question No: 10 Which statement describes a ProCurve Radio Port (RP)?

A. If you change an RP’s configuration, you must always reload the RP before that configuration can take effect.
B. When the RP receives a wireless frame, it removes the 802.11 header and replaces it with an Ethernet header.
C. When the RP receives wireless traffic from stations, it encapsulates that traffic before sending it to the
Wireless Edge Services xl Module.
D. After receiving a configuration from the Wireless Edge Services xl Module, the RP saves that configuration to its internal flash.

Answer: C

Questions and Answers : 130 Q&As
Updated: May 5th , 2008
Market Price: $159.99
Member Price: $99.99
Free download?pass4sure HP0-752
Free download?testking HP0-752

High quality IT Certification Training Exam Questions, Study Guides and Practice Tests are in Downloadable PassGuide Testing Engine,Successful for IT Certification or Full Refund for you.Contact Us:Sales@PassGuide.com

Type	Exam Bible	New Questions & Answers	Latest Updated	Download link
PDF	All Certbible 's Exam Dumps	597	1 days ago	Available

PassGuide Training Materials & Practice Tests

• testking pass4sure hp exams vce format
• pass4sure-hp- CSA-exams
• pass4sure-hp- Master ASE -exams
• pass4sure-hp- MASE -exams
• pass4sure-hp- APS-exams
• pass4sure-hp- ASE-exams
• pass4sure-hp- AIS-exams
• pass4sure-hp- CSE -exams
• pass4sure- HP- APC-exams
• pass4sure-hp- HP Certification -exams