pass4sure MCSE 2000 Security 70-215 v2.93
- Sunday, April 13, 2008, 22:29
- Cert Tests
- 5 views
- 1 comment
MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server : 70-215 Exam
Exam Number/Code: 70-215
Exam Name: MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server
“MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server”, also known as 70-215 exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 400 Q&As to your 70-215 Exam preparation. In the 70-215 exam resources, you will cover every field and category in MCDBA helping to ready you for your successful Microsoft Certification.
Pass4sure don’t provide any actual questions and answers from Microsoft’s Certification Exams .
Free Demo Download
Pass4sure offers free demo for 70-215 exam (MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.
Exam Details
Candidates for this exam operate in medium to very large computing environments that use the Windows 2000 Server operating system. They have a minimum of one year’s experience implementing and administering network operating systems in environments that have the following characteristics: • Supported users range from 200-26,000+. • Physical locations range from 5-150+. • Typical network services and applications include file and print, database, messaging, proxy server or firewall, dial-in server, desktop management, and Web hosting. • Connectivity needs include connecting individual offices and users at remote locations to the corporate network and connecting corporate networks to the Internet..
You want to upgrade a Windows NT Server 4.0 computer to
Windows 2000 Server. The system partition uses the FAT file system.
You start the Setup program by starting the computer from the Windows 2000
Server CD-ROM. However, you receive the following error message, “You chose to
install Windows 2000 on a partition that contains another operating system.
Installing Windows 2000 on this partition might cause the operating system to
function improperly”.
You are unable to perform the upgrade. What should you do to resolve the
problem?
A. Convert the system partition to NTFS.
B. Disable Advanced Configuration and Power Interface (ACPI) support for the
computer.
C. Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0
environment.
D. Remove the Windows 2000 Server CD-ROM and restart the computer by using the
setup floppy disks.
Answer: C
Explanation: When upgrading earlier versions of Windows to Windows 2000 we
must use winnt32.exe and must launch it from within the Windows environment.
Incorrect answers:
A: Windows 2000 can be installed or upgraded on a disk or partition that is formatted
with the FAT file system. There is thus no need to convert the file system to NTFS.
B: The Advanced Configuration and Power Interface is used for power management and
does not affect the installation or upgrade process. It would thus not be necessary to
disable ACPI.
D: The setup floppy disks use Winnt.exe to install Windows 2000. We however can only
use the setup floppy disks to install a clean copy of Windows 2000 on the computer. We
cannot upgrade the operating system to Windows 2000 using the setup floppy disks. We
must use winnt32.exe to upgrade earlier versions of Windows to Windows 2000.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2
QUESTION 2:
You are preparing to install Windows 2000 Server on a new computer. The
computer is connected to a network that includes Windows 98 computers and
Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a
server on the network. What should you do?
A. Start the new computer by using a Windows 98 network boot disk.
Connect to the network server.
Run Winnt32.exe.
B. Start the new computer by using Windows 98 network boot disk.
Connect to the network server.
Run Winnt.exe.
C. On a Windows 2000 Server computer, use Makebt32.exe to create installation startup
disk.
Start the new computer by using the first disk.
D. On a Windows 2000 computer, format a floppy disk.
Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk.
Start the new computer by using the disk.
Answer: B
Explanation: To install Windows 2000 Server on a computer from source files that
are located in a centralized network location we would have to create a network
boot disk that includes DOS drivers for the network adapter. We would have to
start the computer using this boot disk and connect to the network share where the
source files are located. Finally we would start installation process by using
winnt.exe. We must use winnt.exe and not winnt32.exe as the boot disks operate in
DOS mode, which works with 16-bit applications. We would thus not be able to use
32-bit applications like winnt32.exe.
Incorrect answers:
A: We must use winnt.exe and not winnt32.exe as the boot disks operate in DOS mode,
which works with 16-bit applications. We would thus not be able to use 32-bit
applications like winnt32.exe.
C: Makebt32.exe is used to make Windows 2000 setup floppy disks. These cannot be
used to connect to a network share.
D: The boot disk must include drivers for the network adapter.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2
QUESTION 3:
You are installing Windows 2000 Server on a new computer that
has a single 10-GB SCSI disk. The disk controller is not included on the current
Hardware Compatibility List (HCL). You start the computer by using the Windows
2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000
setup, you receive the following STOP error: “INACCESSIBLE_BOOT_DEVICE.”
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B. Select Safe Mode from the Windows 2000 boot menu.
C. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D. Install a driver for the SCSI controller from a floppy disk.
E. Use Device Manager to update the driver for the SCSI controller.
Answer: A, D
Explanation: To solve the problem posed in this scenario we must restart the
Windows 2000 installation process and supply the correct SCSI driver. We cannot
use Device Manager or Safe Mode at this stage since Windows 2000 is not installed
yet. We must press F6 when Setup prompts us to do so. We must then press F6
again to supply the driver for a mass storage controller to the Windows 2000 Setup
program.
Incorrect answers:
B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.
C: We need to Windows 2000 Server CD-ROM to be able to perform the install process.
E: The Device Manager cannot be used at this stage since Windows 2000 is not installed
yet.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2
pass4sure 70-215
# Questions and Answers : 400 Q&As
# Expected Date: October 22nd , 2008
# Price: $129.99 $89.99
Free Down:pass4sure MCSE 2000 Security 70-215 v2.93
Free Down:Testking mcdba 70-215
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Free Certification Exam Download has written 10018 stories on this site.
If you have any doubts about legality of content or you have another suspicions, feel free to contact us:CertGuard@Gmail.com
One Comment on “pass4sure MCSE 2000 Security 70-215 v2.93”
Trackbacks
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!
