Pass4sure Microsoft MCSA 70-224 v2.93

Friday, October 10, 2008, 1:38
Cert Tests
24 views
3 comments

MCSA Installing, Configuring and Administering Microsoft Exchange 2000 : 70-224 Exam
Product DescriptionExam Number/Code: 70-224
Exam Name: MCSA Installing, Configuring and Administering Microsoft Exchange 2000

“MCSA Installing, Configuring and Administering Microsoft Exchange 2000″, also known as 70-224 exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 135 Q&As to your 70-224 Exam preparation. In the 70-224 exam resources, you will cover every field and category in MCSA helping to ready you for your successful Microsoft Certification.

1.You are the Exchange administrator for your company. You have a mailbox store policy for mailbox storage limits in

effect for your entire Exchange organization. The policy is shown in the exhibit. (Click the Exhibit button.) You add a new

Exchange 2000 Server computer. After the server runs for a few weeks, you notice that several mailboxes are

considerably over the limits that are set. You need to configure the server to enforce the limits that you set. What should you do?

A: Configure a new mailbox store policy for the new server.

B: Configure a new server policy and add the new server to this policy. C: Set storage limits on the existing mailbox store on the new server.
D: Add the default mailbox store on the new server to the mailbox store policy.

Correct Answers: D

2.You are the Exchange administrator for your company. A former employee named Rebecca deleted several e-mail messages from her mailbox shortly before resigning from the company. Most of these e-mail messages were received
from Internet sources and contained very important file attachments. You have an online backup that was created one day prior to the deletion, and an offline backup that was created two weeks prior to the deletion. You must recover the deleted
e-mail messages from Rebecca’s mailbox with minimal disruption to current mail services on the network. What should you do?
A: In System Manager, dismount the database that contains the mailbox and restore the appropriate database from the online backup. Remount the database.
B: Install Exchange 2000 Server in an isolated forest. In System Manager of the new installation, dismount the database and restore the appropriate database from the online backup. Remount the database.
C: Stop the Information Store service and restore the appropriate .edb file. Run ISINTEG -patch , and then restart the

Information Store service.

D: Install Exchange 2000 Server in an isolated forest. Stop the Information Store service of the new installation, and

restore the appropriate .edb file. Run ESEUTIL /CM , and then restart the Information Store service.

Correct Answers: B

3.You are the network administrator for Contoso, Ltd. The company hires a consultant named Amy Jones from LitWare, Inc. Amy requires access to your company’s network. She prefers to receive all of her e-mail at her ajones@litware.com
address. You want Amy’s name to appear in the Exchange address lists, but you want e-mail messages to be sent only to her litware.com address. What should you do?
A: Create a user account that has an Exchange mailbox in Active Directory. Change the SMTP address on the E-mail

Addresses tab of the user property sheet to ajones@litware.com.

B: Create a mail-enabled contact object for Amy Jones and specify the SMTP address ajones@litware.com as the e-mail address in Active Directory.
C: Create a user account that does not have an Exchange mailbox in Active Directory. Use Exchange Task Wizard to assign an SMTP address for ajones@litware.com.
D: Create a user account that does not have an Exchange mailbox in Active Directory. Enter ajones@litware.com as the

e-mail address on the General tab of the user property sheet.

Correct Answers: C

4.You are the administrator of an Exchange 2000 Server computer that supports 2,400 mailboxes. The mailboxes are distributed among three mailbox stores that are located in a single storage group. The server is configured as shown in the exhibit. (Click the Exhibit button.)
Users report that it takes up to 10 seconds to send an e-mail message during peak times of the business day. You need to optimize the responsiveness of the Exchange server.
What should you do?

A: Move one of the mailbox stores from Disk 3 to Disk 5.

B: Set the full-text indexing to always run for all three mailbox stores.

C: Create a new mailbox store in a new storage group on Disk 5, and place the new transaction log files on Disk 2. Move

1,200 of the mailboxes to this new mailbox store.

D: Create a new mailbox store, and place the mailbox store files on Disk 5. Move 1,200 of the mailboxes to this new mailbox store.
Correct Answers: A

5.You are the Exchange administrator for your company. Your Exchange server is becoming extremely low on available

hard disk space. Based on the current rate of growth, you expect your server to run out of storage space in two months. The executives in your organization typically send very large attachments with their e-mail messages. The other users in your organization typically do not send attachments larger than 1 MB.
You want to accomplish the following goals:

The executives must have unrestricted message storage space on the Exchange server.

All employees other than executives must be limited to 50 MB of storage space for messages on the Exchange server.

A separate set of transaction log files must be created for the executives.

The executives must be able to have access to e-mail prior to other employees if the Exchange server needs to be restored.
The Exchange server must not run out of hard disk space. You take the following actions:
Create a new storage group.

Create a new mailbox store in the new storage group.

Move the mailboxes of all executives to the new mailbox store.

On the existing mailbox store, set a maximum storage limit of 50 MB. Which result or results do these actions produce? (Choose all that apply.)
A:The executives have unrestricted message storage space on the Exchange server.

B:All employees other than executives are limited to 50 MB of storage space for messages on the Exchange server. C:A separate set of transaction log files is created for the executives.
D:The executives can have access to e-mail prior to other employees if the Exchange server needs to be restored. E:The Exchange server will not run out of hard disk space.
Correct Answers: A, B, C, D

6.You are the Exchange administrator for your company. Users report that each time one of them sends an e-mail message to a large distribution group of external addresses, the message is not delivered and the sender receives a
non-delivery report (NDR). You verify that messages sent to small external distribution groups and single external users are being delivered. You need to configure the server to allow all messages to be delivered. What should you do?
A: Use the Active Directory Users and Computers console to change the message size limits on the distribution group.

Donwload Free Certbible, The Most Realistic Practice Questions and Answers,Help You Pass any Exams

B: Use the Active Directory Users and Computers console to change the message restrictions on the distribution group.

C: Increase the maximum number of connections on the SMTP virtual server. D: Increase the maximum number of recipients on the SMTP virtual server. Correct Answers: D

7.You are the Exchange administrator for your company. Users report that it takes longer to open their mailboxes than it

did in the past. You view the Task Manager information on the Exchange 2000 Server computer. The results are shown in the Task Manager: Processes exhibit and the Task Manager: Performance exhibit. (Click the Exhibit button.)
You need to decrease the amount of time that it takes users to open their mailboxes. What should you do?

A: Install an additional network adapter on the server.

B: Move the mailbox store to a hardware RAID-5 disk array. C: Install an additional CPU on the server.
D: Install more RAM on the server.

Correct Answers: D

8.You are the administrator of an Exchange 2000 Server organization that has more than 50,000 mailboxes. Managers report that it is difficult to search the global address list to find all the users in only their departments. Each manager wants
to be able to display only the mailboxes in the manager’s own department. The managers want these lists to be available only to the members of the Managers group. What should you do?
A: Create a global address list for each department, and limit the scope of each global address list to only the members of that department. Grant the Managers group the Read permission to the global address list, and remove the Read
permission from the Authenticated Users group.

B: Create a global address list for each department, and limit the scope of each global address list to only the members of that department. Grant the Managers group the Read permission to the global address list, and deny the Authenticated Users group the Read permission.
C: Create an address list for each department, and limit the scope of each address list to only the members of that department. Grant the Managers group the Read permission to the address list, and remove the Read permission from the Authenticated Users group.
D: Create an organizational unit (OU) for each department, and move the users from the departments into their respective OUs. Grant the Managers group the Read permission to the OU, and deny the Authenticated Users group the Read permission.
Correct Answers: C

9.You are the Exchange administrator for your company. You currently use Exchange Server 5.5 in your Windows 2000

domain. You have one site in the Exchange Server 5.5 organization, and you have two Exchange Server 5.5 computers in that site, named Server1 and Server2.
You plan to install a new Exchange 2000 Server computer, named Server3, into the existing Exchange Server 5.5 site. The proposed network is shown in the exhibit. (Click the Exhibit button.)
You plan to have mailboxes on all three Exchange servers. To simplify administration, you must be able to manage all Exchange mailboxes and user accounts from the Active Directory Users and Computers console. You need to configure the servers so that changes made in Active Directory are reflected on the Exchange Server 5.5 computers.
Prior to installing Server3, what should you do?

A: In Active Directory, create an organizational unit (OU) that has the same name as the Exchange Server 5.5 site. Move

all of the Exchange Server 5.5 user accounts into the new OU. Delegate Full Administrator permissions on that OU to the

Exchange Server 5.5 service account.

B: In Active Directory Connector (ADC), create a two-way Connection Agreement between Server4 and Server1. Connect the Connection Agreement to the recipients container in the Exchange Server 5.5 site.
C: In Active Directory Connector (ADC), create a one-way Connection Agreement from Server1 to Server4. Connect the

Connection Agreement to the recipients container in the Exchange Server 5.5 site.

D: Upgrade Server1 to Windows 2000, and promote Server1 to a domain controller. In Active Directory, create an organizational unit (OU) that has the same name as the Exchange Server 5.5 site. Move all of the Exchange Server 5.5 user accounts into the new OU.
Correct Answers: B

10.Your company installs Exchange 2000 Server as part of a planned migration of all mailboxes from Exchange Server

5.5 to Exchange 2000 Server. You need to implement Instant Messaging between the managers and their assistants as soon as possible. You install the Instant Messaging Service and create an RVP virtual server on the Exchange 2000
Server computer, but you are not ready to migrate the mailboxes to Exchange 2000 Server. What should you do to enable

Instant Messaging for the managers and their assistants?

A: Install the Internet Locator Service (ILS) on the Exchange Server 5.5 computers that have the mailboxes of the managers and their assistants. Use Exchange administrator to configure the ILS parameters for each of these mailboxes
to point to the Exchange Server 5.5 ILS server.

B: Use the Active Directory Users and Computers console to move the mailboxes of the managers and their assistants from the Exchange Server 5.5 computers to the Exchange 2000 Server computers. Enable the mailboxes for Instant

Messaging.

C: Use the Active Directory Users and Computers console to enable Instant Messaging for the managers and their assistants. Specify the Exchange 2000 Server computer as the Instant Messaging home server.
D: Install the Chat service on an Exchange Server 5.5 computer. Use the Active Directory Users and Computers console

to specify this Exchange Server 5.5 computer as the Internet Locator Service (ILS) server.

Correct Answers: C

Pass4sure 70-224

Questions and Answers : 135 Q&As Expected Date: October 24th , 2008 Price: $129.99 $89.99 Pre-Buy price: $62.99 Save $27

Free download:pass4sure Microsoft MCSA 70-224 v2.93
Free download:testking Microsoft MCSA 70-224 v2.93