Pass4sure Microsoft mcsd 70-554(CSharp)

UPGRADE:MCSD MS.NET Skills to MCPD Entpse App Dvlpr Pt2 : 70-554(CSharp) Exam
Product DescriptionExam Number/Code: 70-554(CSharp)
Exam Name: UPGRADE:MCSD MS.NET Skills to MCPD Entpse App Dvlpr Pt2

“UPGRADE:MCSD MS.NET Skills to MCPD Entpse App Dvlpr Pt2″, also known as 70-554(CSharp) exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 58 Q&As to your 70-554(CSharp) Exam preparation. In the 70-554(CSharp) exam resources, you will cover every field and category in MCSD.NET helping to ready you for your successful Microsoft Certification.

QUESTION 1
You must design the Stanford Finance IP address assignment strategy. To this end
you need to implement the DHCP service on the internal network.
What should you do?
A. Install a DHCP server in both the New York and London offices. Then configure a
single scope and an exclusion range.
B. Install a DHCP server in both the New York and London offices. Then configure two
scopes: Then configure an exclusion range for each scope.
C. Install two DHCP servers in the New York office. Then configure a superscope with
two member scopes on each DHCP server. Then configure an exclusion range that
corresponds to one of the member scopes.
D. Install a DHCP server in both the New York and London offices. Then configure a
superscope with two member scopes on each DHCP server. Then configure an exclusion
range that corresponds to one of the member scopes.
Answer: B
Explanation: DHCP is responsible for the provision of dynamic address allocation and
TCP/IP configuration parameters to client computers. You need to implement a DHCP
server in each office then configure it to provide addresses to clients on both subnets.
Therefore you should configure one scope for the local subnet and one scope for the
other subnet. In New York you need to exclude 20% of the addresses from the scope that
corresponds to the New York subnet and exclude 80% of the addresses from the scope
that corresponds to the London subnet. And in London you should exclude 20% of the
addresses from the scope that corresponds to the London subnet and exclude 80% of the
addresses from the scope that corresponds to the New York subnet. This is required to
ensure that each server has a unique pool of addresses and no address conflicts can occur.
Then (not mentioned here) you should enable clients on each subnet to use DHCP server
on the other subnet, you should implement DHCP Relay Agent either on the routers or on
one server on each subnet.
1. We should only make use of DHCP-assigned IP addresses for all our client computers
on the internal network. Also if we are to maintain the existing line-of-business
applications currently in use, we cannot discontinue supporting NetBIOS over TCP/IP on

Actualtest.org- The Power of Knowing
the internal network. To this end all client computers on the internal network will be
configured to use DHCP to obtain the addresses of DNS and WINS servers
Incorrect answers:
A: A DHCP client accepts TCP/IP settings from the DHCP server that is the first one to
respond to the client’s request. Therefore, normally, each DHCP server will service only
the clients in the local subnet. Should one of the servers be temporarily unavailable, the
remaining server will service clients on both subnets. Therefore this option is not as
efficient.
C: A superscope is a set of one or more member scopes that is used to support multiple
logical subnets on the same physical network segment. In Stanford Finance there is no
mention made of any network segments that includes multiple logical subnets. Therefore
this option is irrelevant.
D: A superscope is a set of one or more member scopes that is used to support multiple
logical subnets on the same physical network segment. In Stanford Finance there is no
mention made of any network segments that includes multiple logical subnets. Therefore
this option is irrelevant.
Reference:
Microsoft Windows Server 2003 Deployment Kit: Deploying DHCP – creating your
DHCP server design, defining scopes.
Walter Glenn, and Michael T. Simpson; MCSE 70-297 Training Kit – Designing a
Windows server 2003 Active Directory and Network Infrastructure, Chapter 4 , pp. 4-26.
QUESTION 2
You need to design the remote access infrastructure for the Stanford Finance
network. To this end you need to configure the VPN server the meet the stated
requirements.
What should you do? (Each correct answer presents part of the solution. Choose
TWO.)
A. On the VPN server create a static pool of addresses for assignment to VPN clients.
B. On the VPN server enable Bandwidth Allocation Protocol (BAP).
C. On the VPN server configure DHCP Relay Agent.
D. Configure the VPN server to use the DHCP server to assign IP addresses to VPN
clients.
Answer: C, D
Explanation: In the Stanford Finance network the VPN clients must be assigned IP
addresses. This can be done either by using a static pool of addresses or using a DHCP
server. In this scenario it is stated the all client computers use DHCP to acquire their IP
addresses. Therefore you should configure the VPN server to use the DHCP server to
assign IP addresses to the VPN clients. And then configure the DHCP Relay Agent on
the VPN server.
1. We should only make use of DHCP-assigned IP addresses for all our client computers.
Incorrect answers:
A: The scenario states pertinently that all client computers are to use DHCP-assigned IP

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

Actualtest.org- The Power of Knowing
addresses. Therefore you should not make use of a static pool of addresses even though it
will also work.
B: BAP cannot be used on an entire VPN tunnel between a VPN client and a server,
therefore you cannot use this option.
Reference:
Microsoft Windows Server 2003 Deployment Kit: Deploying DHCP – creating your
DHCP server design, defining scopes.
Walter Glenn, and Michael T. Simpson; MCSE 70-297 Training Kit – Designing a
Windows server 2003 Active Directory and Network Infrastructure, Chapter 4 , pp. 4-26.
Jerry Honeycutt: Introducing Microsoft Windows Server 2003, Microsoft Press, Chapter
6.
QUESTION 3
You need to design a solution to address the concern of the Chief Security officer
regarding the installation of unauthorized software on domain computers.
What should you do? (Each correct answer presents a complete solution. Choose
TWO.)
A. Disable the Disable Windows Installer policy in the Default Domain GPO.
B. Enable the Disable Windows Installer policy and select the For
non-managed apps only setting in the Default Domain GPO.
C. Enable the Disable Windows Installer policy and select the Never setting in the
Default Domain GPO.
D. Enable the Disable Windows Installer policy and select the Always setting in the
Default Domain GPO.
E. Configure software restriction policy at domain level by creating the appropriate rules.
Answer: B, E
Explanation: Enabling the Disable Windows Installer policy and selecting the For
non-managed apps only setting in the Default Domain GPO will ensure that only
administrator approved applications will be installed.
You can also control the software deployment by means of configuring a software
restriction policy at domain level.
1. No unauthorized software must be installed on any of the computers on the Stanford
Finance network.
2. We must also ensure that our users do not install unauthorized software on the
company client computers.”
Incorrect answers:
A: If you disable the Disable Windows Installer policy because it will allow any
application to be installed.
C: Selecting the Never setting on the Disable Windows Installer policy on the Default
Domain GPO will prevent the installation of any applications, but will also prevent the
administrator-approved applications from being installed.
D: Selecting the Always setting on the Disable Windows Installer policy on the Default

Actualtest.org- The Power of Knowing
Domain GPO will prevent the installation of any applications, but will also prevent the
administrator-approved applications from being installed.
Pass4sure 70-554(CSharp)

Questions and Answers : 58 Q&As Expected Date: October 26th , 2008 Price: $129.99 $89.99 Pre-Buy price: $62.99 Save $27

Free download:pass4sure Microsoft mcsd 70-554(CSharp)
Free download:testking Microsoft mcsd 70-554(CSharp)
password:www.certbible.org

High quality IT Certification Training Exam Questions, Study Guides and Practice Tests are in Downloadable PassGuide Testing Engine,Successful for IT Certification or Full Refund for you.Contact Us:Sales@PassGuide.com

Type	Exam Bible	New Questions & Answers	Latest Updated	Download link
PDF	All Certbible 's Exam Dumps	597	1 days ago	Available

PassGuide Training Materials & Practice Tests

• Pass4sure Microsoft MCSD.NET 70-553(CSharp) V2.83
• Pass4sure Microsoft MCSD.NET 70-553(VB) V2.83
• Pass4sure Microsoft mcsd.NET 70-554(VB) v2.83
• Pass4sure Microsoft mcsd 70-301 v2.93
• Testking Mcsd 70-315 Exam
• MCAD/MCSD Self-Paced Training Kit: Microsoft (2nd Edition) .NET Core Requirements, Exams 70-305, 70-315, 70-306, 70-316, 70-310, 70-320, and 70-300 box vol. set (Paperback)
• Microsoft TestKing 70-300 v2008-07-01 by mjhorenberg.vce
• MCSD and MCAD Certification 70-300 Training VB.NET C.NET and Visual Studio .NET
• MCSD MCAD Certification C.NET Training 70-315
• MCAD MCSD Certification Training SQL 70-229 Exam