Posts Tagged ‘ccna’

Interconnecting Cisco Networguide Devices Part 2 : 640-816 Exam Exam Number/Code: 640-816 Exam Name: Interconnecting Cisco Networguide Devices Part 2 Full story

CCNA Lab 1 Change Router Name and PasswordLab Requirements: 1. Router name: router 2. Set password to cisco, sercret to cisco, and vty to cisco. 3 All the passwords are required to be encrypted. Lab Process: Router>enable Router#configure terminal Router(config)#hostname router set route name Router(config)#enable password cisco set router password Router(config)#enable secret cisco set router encryption password Router(config)#line vty 0 Router(config-line)#login Router(config-line)#password cisco require password authentication Router(config-line)#exit Router(config)#service password-encryption set global password encryption Full story

1Router name: CCNA1,CCNA2,CCNA3 2.Set password to cisco, secret to cisco1, and vty to cisco. All the passwords are required to be encrypted. 3. Configure all these routers. Lab Process: Configure Router 1. Router>enable Router#configure terminal Router(config)#hostname CCNA1 set router name CCNA1(config)#enable password cisco set enable password CCNA1(config)#enable secret cisco1 set encryption password CCNA1(config)#line vty 0 4 set VTY line mode CCNA1(config-line)#login set password authentication CCNA1(config-line)#password cisco set line password CCNA1(config-line)#exit CCNA1(config)#service password-encryption encrypt all the passwords globally CCNA1(config)#interface serial 1/1 ... Full story

CCNA Lab 4 Decrypt Router PasswordLab Requirements: 1. The router name is passguide. The console port of the router is connected to the com port of the PC through a reverse cable. 2. Set the password of the router to ccna and save the settings. 3. Restart the router and decrypt the password. Lab Process: Configurations on the router Router(config)#hostname passguide Passguide(config)#enable secret ccna Passguide(config)#exit Passguide#copy running-config startup-config Passguide#reload When restarting the router, press Ctrl+Break to ... Full story

CCNA Lab 2 Set Router Port Address/Label and Save SettingsLab Requirements: 1. On the router port, set the IP address to 202.119.249.219 and mask to 255.255.255.0. 2. Set the router prompt message to welcome to router CCNAlab. 3 Set the router port prompt message to this is a serial port. 4. Save the settings. Lab Process: Router>enable Router#configure terminal Router(config)#interface fastethernet 0/0 Router(config-if)#ip address 202.119.249.219 255.255.255.0 set the IP address of fast Ethernet port ... Full story

Exam Engine + Epad file like passguide & passguide. Full story

All Passguide/topcerts For Cisco Full story

free p4s downPASSGUIDES ALL IN ONE : Full story

Offer Passguide 640-802 2.93 + Ciscopress Icnd 2008 Full story

Cisco Certified Network Associate : 640-802 Exam latest Full story