testking CompTIA DHTI+ Exam HT0-201

CEA-CompTIA DHTI+ Exam : HT0-201 ExamDigital Home Technology Integrator Certification
CEA-CompTIA DHTI+ Examination Objectives
HT0-201
 The CEA-CompTIA DHTI+ certification is a vendor neutral cross-industry credential providing
recognition that a home technology integration professional has attained a standard of excellence
in the integrated home networks industry.  The CEA-CompTIA DHTI+ certification is based on a
set of standards designed to measure the mastery of important skills and knowledge necessary to
configure, integrate, maintain, troubleshoot, and comprehend basic design concepts of
electronic/digital home systems.  In order to achieve the CEA-CompTIA DHTI+ certification, the
candidate must pass the Digital Home Technology Integrator certification exam HT0-201.
 
This exam targets individuals in the multiple industries that touch the home, including technology
integrators, security system technicians, cable, satellite, telecommunications, and A/V installers,
electricians, and network administrators.  Individuals with the ability to install/connect one or more
residential subsystems but cannot troubleshoot and/or configure without significant aid of
technical support are prime candidates for this certification.  Individuals with a strong background
in a single discipline wishing to expand their expertise are also very good candidates for this
certification.  CompTIA recommends individuals have 18-24 months experience in the home
integration industry.
 
The CEA-CompTIA DHTI+ certification exam assumes candidates possess the skills and
knowledge of basic PC hardware, hand and tool skills, safety precautions, basic electrical
awareness, local regulations and building codes.  This certification is not intended to provide
basic installation skills such as wire termination and basic hand/tool skills.  This certification is not
intended to provide project management, sales, or master system design skills.
 
The skills and knowledge measured by this examination are derived from a job task analysis with
emphasis on North America and Europe.  A publicly available worldwide survey supplemented
the job task analysis.
 
Note: This examination blueprint for the CEA-CompTIA DHTI+ examination includes weighting,
test objectives, and example content.  Example topics and concepts are included to clarify the
test objectives and should not be construed as a comprehensive listing of all the content covered
by this examination.  This blueprint may undergo additional minor modifications during the test
development phase.
 
The table below lists the domain areas measured by this examination and the approximate extent
to which they are represented in the examination.
1.0 Networking 
 
1.1  Identify basic networking protocols and their uses and know when / how to apply them.
•  DHCP
•  UDP
•  DNS
•  TCP/IP
•  Subnet masks
 
1.2  Recognize and implement methods of network security.
•  Personal Computer (PC) security
•  Antivirus
•  Home networking security
•  Firewall knowledge
 
1.3  Configure setup and maintain a residential LAN (Local Area Network).
•  Client Configuration
o  Resource sharing
o  Peer-to-Peer
•  Remote access setup
•  Network device setup and integration
o  Broadband configuration (e.g. DSL, Cable, and Satellite)
o  Routers
o  Hubs
o  Switches
o  PoE (Power over Ethernet)
 
1.4  Configure setup and maintain a secure wireless network.
•  Differentiate applications of hardwired vs. wireless networks.
•  Assess networking security and encryption standards.
o  WEP
o  WPA
o  MAC filtering
o  SSID
o  WPA2
•  Wireless networking integration and troubleshooting
o  Frequency management
•  Wireless protocol standards
o  802.11 a/b/g/n
1.5  Identify and define network cabling characteristics and performance.
•  Cable types
o  CAT5
o  CAT5e
o  CAT6
o  Fiber
o  COAX
•  Cable length limitations
•  Protocols
o  10BaseT
o  100BaseT
o  1000BaseT
•  Shielded (STP) vs. Unshielded (UTP)
•  Plenum vs. Non-plenum
•  Importance of conductor colors
 
2.0  Audio / Video 
 
2.1  Implement, maintain and troubleshoot multiroom audio systems.  Identify common
interference sources.
•  Control devices
o  Keypads
o  Rotary volume controls
o  Sliders
o  Push button controls
o  Touch screen
o  Wireless keypads
o  Handheld devices
•  Differentiate and define single source, multi-source, and local source.
o  Analog audio system
o  Analog CAT5 audio system
o  Digital CAT5 audio system
•  Proper cable use
o  Line level vs. speaker level
•  Amplification
o  Ohm’s Law (e.g. Impedance matched or non-impedance matched)
o  Watts vs. dB
o  Local amplification
o  Centralized amplification
•  Speaker types
o  Inwall
o  Surface mounted
o  Ceiling mounted
o  Freestanding
o  Fixed
o  Animated
•  Speaker specifications
o  Frequency response
o  Efficiency
o  Power handling
2  Install, configure and maintain a residential home theater system.
•  Audio Components
o  Define basics of acoustics (e.g. Sound reflection, speaker placement, sound
cancellation, sound balance)
o  Audio/Video components setup and integration (e.g. Digital signal cables
and lengths, Legacy devices)
o  Multichannel Surround (e.g. SACD, DVDA, DTS, DTSES, DDEX, DD,
etc.) (e.g. Crossovers and speaker setup)
•  Video components
o  Display types (e.g.  Plasma, DLP, LCD, LCOS, CRT, Rear projection,
Front projection, Direct view.)
o  Hi Definition resolutions options (e.g. 720p, 1080i, 1080p, etc.)
o  Tuner types (e.g. NTSC, PAL, ATSC, QAM, Cable card, VSB, NDVBT,
o  Digital video cable and connector types (e.g. DVI and HDMI –
compatibility and interoperability issues)
•  MRAV (Multi-Room Audio/Video) standards if/when applicable.
 
2.3  Assess, install and configure content management systems and describe their
applications in a residential environment. 
•  Describe typical applications and physical connections of sources
o  Media servers
o  Media PC
o  MP3 players
o  DVD players
o  Satellite
o  Cable
o  DVR
o  Gaming systems
o  Satellite radio
o  Legacy devices
o  Streaming media
•  Summarize types of media storage, methods to transfer and backup data.
o  Memory cards
o  NAS devices (Network Attached Devices)
o  Remote storage
o  Local storage
o  Frequency of backup
•  Other connection considerations
o  Digital Right Management
2.4  Implement, maintain and troubleshoot multiroom video systems.
•  Define signal types and their applications
o  Digital Distribution (e.g. Analog to IP converters, IP to Analog converters,
Wireless distribution, IEEE 1394)
o  RF Distribution characteristics.  Identify and troubleshoot noise and
interference. (E.g. Splitters and taps, active and passive, Attenuators, Bi-
directional, Modulation and filtration, Amplification, IR over COAX.)
o  Analog Distribution (e.g. Composite, Component, and S-Video, Balun.)
•  Identify cable types and their applications
o  COAX (e.g. RG-59, RG-6, RG-6 QS, DV, Serial data, CCS, BC)
o  CAT5/5e/6
•  Termination (e.g. RCA, BNC, and F)
•  Satellite
o  Multi-switches
o  Diplexer
o  LNB (Low Noise Block Down Converter)

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

free down1:testking  CompTIA DHTI+ Exam HT0-201

free down2:testking  CompTIA DHTI+ Exam HT0-201

password:www.certbible.org

High quality IT Certification Training Exam Questions, Study Guides and Practice Tests are in Downloadable PassGuide Testing Engine,Successful for IT Certification or Full Refund for you.Contact Us:Sales@PassGuide.com

Type	Exam Bible	New Questions & Answers	Latest Updated	Download link
PDF	All Certbible 's Exam Dumps	597	1 days ago	Available

PassGuide Training Materials & Practice Tests

• Testking Comptia HTI+ Exam
• Free Testking Comptia A+ Exam
• CompTIA TestKing N10-003 v1.0 by SRE 253q.vce
• [offer] Testking 220-601, 220-602
• free testking comptia SERVER+ sk0-002 exam
• free testking comptia security + sy0-101 exam
• Free latest testking CompTIA RFID+ Exam RF0-001
• testking CompTIA HTI+ HT0-102 Exam
• free testking CompTIA HTI+ HT0-101 Exam
• testking CompTIA i-NET+ Exam IK0-002