testking HP ASE HP0-752
- Thursday, September 25, 2008, 21:18
- Cert Tests
- 1 views
- Add a comment
HP0-752 Exam : ProCurve Mobility
Question No: 1 When does supplemental authentication occur?
A. after both the open-key 802.11 authentication and the 802.11 association are completed successfully
B. after both the shared-key 802.11 authentication and the 802.11 association are completed successfully
C. after the open-key 802.11 authentication is completed successfully but before the 802.11 association process begins
D. after the shared-key 802.11 authentication is completed successfully but before the 802.11 association process begins
Answer: A
Question No: 2 Which statement describes a closed system?
A. In a closed system, the wireless network name is encrypted in the 802.11 header.
B. In a closed system, the wireless network name cannot be detected in any 802.11 frames.
C. In a closed system, the wireless network name is not advertised in the 802.11 beacon frame.
D. In a closed system, the wireless network name is not included in the header of any 802.11 frames.
Answer: C
Question No: 3 Which statements describe 802.11a? (Select two.)
A. It interferes with 802.11b/g.
B. It requires support for 802.11h in Europe.
C. It experiences interference from microwaves. D. It has higher data rates than 802.11b.
E. It was the first adopted and most widely used standard.
Answer: B, D
Question No: 4 You configure two access points (APs) to support a single wireless LAN (WLAN). One
station associates with one AP, and one station associates with the other AP. What do the two stations have
in common?
A. wireless cell
B. service set identifier (SSID)
3
HP0-752
C. basic service set identifier (BSSID)
D. independent basic service set identifier (IBSSID)
Answer: B
Question No: 5 In which mode does the ProCurve Access Point (AP) 420 operate?
A. mixed-cell mode B. in-cell relay mode C. peer-to-peer mode D. infrastructure mode
Answer: D
Question No: 6 ProCurve Mobility Infrastructure Solutions help you meet the challenges posed by a wireless network (as compared to a traditional wired network). What is one of these challenges?
A. 802.11 standards do not provide any guidelines for Layer 2 roaming.
B. Studies have found that users tend to be less productive when they have mobile access to a network.
C. Multiple users connect to the network through the same access point (AP), but access must be customized for each user.
D. 802.11 standards do not provide any encryption, so you must create virtual private network (VPN) tunnels to each end station.
Answer: C
Question No: 7 What is one reason to choose ProCurve’s Wireless LAN System over its standalone AP
solution?
A. Your network requires many wireless devices that are managed from a central location. B. You need your wireless network solution to provide RADIUS services.
C. Your network requires Layer 3 roaming and advanced authentication options.
D. You want to manage your wireless network using ProCurve Manager (PCM) Plus.
Answer: A
4
HP0-752
Question No: 8 When configuring a Wireless LAN (WLAN) on the ProCurve Wireless Edge Services xl
Module, you can use Normal mode or Advanced mode. Why would you use Advanced mode, rather than
Normal mode?
A. You want to configure 16 WLANs.
B. You want to customize the transmit power for only one RP.
C. You want one WLAN to be supported on only one of the RPs.
D. You want the adopted Radio Ports (RPs) to beacon a WLAN that has an index number of 4.
Answer: C
Question No: 9 Which ProCurve Wireless LAN System feature protects your company if a Radio Port
(RP) fails?
A. redundancy group
B. network self-healing
C. interference avoidance
D. radio frequency (RF) patching
Answer: B
Question No: 10 Which statement describes a ProCurve Radio Port (RP)?
A. If you change an RP’s configuration, you must always reload the RP before that configuration can take effect.
B. When the RP receives a wireless frame, it removes the 802.11 header and replaces it with an Ethernet header.
C. When the RP receives wireless traffic from stations, it encapsulates that traffic before sending it to the
Wireless Edge Services xl Module.
D. After receiving a configuration from the Wireless Edge Services xl Module, the RP saves that configuration to its internal flash.
Answer: C
The following courses are the recommended training for HP0-752 exam PDF. HP0-752 Q & A with Explanations
HP0-752 Audio Exam
HP0-752 Study Guide
HP0-752 Preparation Lab
testking HP0-752
Interactive Testing Engine Included!
164 Questions
Updated : 09/18/2008
Price : $87.99 $79.99
Free download?testking HP ASE HP0-752
Free download?pass4sure HP ASE HP0-752
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
| All Certbible 's Exam Dumps |
597 |
1 days ago | Available |
PassGuide Training Materials & Practice Tests
About the Author
Write a Comment
Gravatars are small images that can show your personality. You can get your gravatar for free today!

