vcp-310 braindumps

Practice Exams for VCP-310 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your VCP exam and get your VCP Certification.
We guarantee your success in the first attempt. If you do not pass the VCP VCP-310 (VMware Certified Professional on VI3) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

certbible VCP-310 Downloadable.
Printable Exams (in PDF format) Our Exam VCP-310 Preparation Material provides you everything you will need to take your VCP exam. The VCP Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get VCP exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first VCP exam try, but also save your valuable time .QUESTION 178:

ESX Server uses _________ locks, which are managed by the VMFS distributed lock manager.
A. disk level
B. file level
C. drive level
D. vmfs level
Answer: B

QUESTION 179:

SCSI reservations are not held during metadata updates to the VMFS volume. ESX Server uses ____________ SCSI reservations as part of its distributed locguide protocol.
A. long term
B. file level
C. short-term
D. short-lived
Answer: D
209. What is the best way to eliminate single point of failure, even when binding multiple NICS?
A. Ensure the network adapters that are bound to multiple virtual switches originate from separate network switches to eliminate any single points of failure.
B. Ensure the network adapters that are bound to the virtual switch originate from a single network switche to eliminate any single points of failure.
C. Ensure the network adapters that are bound to the virtual switch originate from separate network switches to eliminate any single points of failure.
Answer: C

210. What is the maximum number of vSwitches on a single host?

A. 256
B. 248
C. 284
D. 128
E. 127
Answer: E

High quality and Value for the VCP-310 Exam.
Testpassport Practice Exams for VCP-310 (VMware Certified Professional on VI3) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your VCP-310 exam and get your VCP Certification.
We guarantee your success in the first attempt. If you do not pass the VCP VCP-310 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the VCP-310 exam. TestPassport VCP-310 contains 232 questions(2009-01-02), multiple choice answers
206. What are the network services provided by the VMKernel? (Select all that apply)
A. iSCSI
B. VMotion
C. NFS
D. SAN based
E. Local Storage
Answer: A, B, C

207. Unlike other VMkernel services, __________ has a service console component, so networks that are used to reach iSCSI targets must be accessible to both service console and VMkernel TCP/IP stacks.
A. iSCSI
B. NFS
C. SAN
D. Local Disk Storage
Answer: A

208. The vSwitch policies consist of:
A. Layer 3 Security policy
B. Layer 2 Security policy
C. Failover policy
D. Traffic Shaping policy
E. Load Balancing policy
F. Load Balancing and Failover policy
Answer: B, D, F
203. When two or more virtual machines are connected to the same vSwitch, network traffic between them is _______________
A. routed externally
B. routed locally
C. not routed
D. routed internally
Answer: B

204. You need to enable two types of network services in ESX Server:
A. Connecting virtual machines to the physical network
B. Connecting VMkernel services to an internal only network
C. Connecting VMkernel services to the physical network
D. Connecting virtual machines to a vSwitch with no Physical NIC
Answer: AC

205. Your __________ networguide stack must be set up properly to accommodate VMotion.
A. Service Console
B. VMkernel
C. vSwitch
D. Port Group
Answer: B
198. Layer 2 is the data link layer. The three elements of the Layer 2 Security policy are: (Select all that apply)
A. promiscuous mode
B. non-promiscuous mode
C. MAC address changes
D. uplink speed
E. forged transmits
F. network shaping
Answer: ACE

199. In the Policy Exceptions pane, what two options do you have under the Layer2 Security policy exceptions: Promiscuous Mode?
A. Reject
B. Accept
C. Apply
D. Cancel
Answer: A, B
200.ESX Server shapes traffic by establishing parameters for three outbound traffic characteristics: average bandwidth, burst size, and peak bandwidth. You can set values for which characteristics through the VI Client, establishing a traffic shaping policy for each uplink adapter?
A. Average Bandwidth
B. Maximum Bandwidth
C. Burst Size
D. Peak Bandwidth
E. Burst Average
F. Maximum Burst
Answer: A, C, D

201. In the Policy Exceptions pane: Load Balancing – What Options are available? (Select all that apply)
A. Route based on the originating port ID
B. Route based on the destination port ID
C. Route based on ip hash
D. Route based on destination MAC hash
E. Route based on source MAC hash
F. Route based on source NIC hash
G. Use explicit failover order
Answer: A, C, E, G

Donwload Free PassGuide Braindumps-The Most Realistic Practice Questions and Answers,Help You Pass any Exams

202. VLANs enable a single physical LAN segment to be further segmented so that groups of ports are isolated from one another as if they were on physically different segments. ________ is the standard.
A. 802.1Q
B. 801.2Q
C. 802.2Q
D. 801.1Q
Answer: A
200.ESX Server shapes traffic by establishing parameters for three outbound traffic characteristics: average bandwidth, burst size, and peak bandwidth. You can set values for which characteristics through the VI Client, establishing a traffic shaping policy for each uplink adapter?
A. Average Bandwidth
B. Maximum Bandwidth
C. Burst Size
D. Peak Bandwidth
E. Burst Average
F. Maximum Burst
Answer: A, C, D

201. In the Policy Exceptions pane: Load Balancing – What Options are available? (Select all that apply)
A. Route based on the originating port ID
B. Route based on the destination port ID
C. Route based on ip hash
D. Route based on destination MAC hash
E. Route based on source MAC hash
F. Route based on source NIC hash
G. Use explicit failover order
Answer: A, C, E, G

202. VLANs enable a single physical LAN segment to be further segmented so that groups of ports are isolated from one another as if they were on physically different segments. ________ is the standard.
A. 802.1Q
B. 801.2Q
C. 802.2Q
D. 801.1Q
Answer: A
QUESTION 124:

A standalone ESX Server with two physical CPUs has two running virtual machines (VMs) labeled VMA and VMB. Each VM has two virtual CPUs. VMA has 4000 CPU shares and VMB has 2000 CPU shares. VMA is continuously using 10% of the ESX Server’s CPU resources. VMB attempts to use all CPU resources on the ESX Server. Ignore overhead from the service console. What percentage of the ESX Server’s CPU resources will VMB be granted?
A. 90%
B. 100%
C. 33%
D. 50%
Answer: C

QUESTION 125:

A Virtual Infrastructure Client shows a DRS cluster that contains a resource pool named “Grafted from xyz.”
What is the likely explanation for this?
A. The host named xyz was put into Maintenance mode.
B. Another DRS cluster named xyz used an expandable reservation to provide resources to this DRS cluster.
C. The host named xyz was added to the DRS cluster.
D. Originally, the DRS cluster contained a host named xyz that has since been removed from the cluster.
Answer: C
195. If you enter __ or leave the field blank, the port group can see only untagged (non-VLAN) traffic. If you enter ____, the port group can see traffic on any VLAN while leaving the VLAN tags intact.
A. 0/4095
B. 999/0
C. 4095/0
D. 99/4095
Answer: A

196. The IP address that you assign to the service console during installation must be different from the IP address that you assign to VMkernel’s TCP/IP
A. True
B. False
Answer: A

197. All NAS and iSCSI servers need to be either reachable by the default gateway or on same broadcast domain as the associated vSwitches.
A. True
B. False
Answer: A
192. A vSwitch models a physical Ethernet switch. The default number of logical ports for a vSwitch is __. However, a vSwitch can be created with up to ____ ports in ESX Server 3.X.
A. 56/529
B. 1016/1600
C. 56/1016
D. 52/1016
Answer: C

193. You can create a maximum of ____ port groups on a single host.
A. 512
B. 528
C. 1016
D. 56
Answer: A

194. The network adapters panel displays the following information:
A. All Port Groups
B. Device
C. Host Name
D. Speed
E. Configured
F. vSwitch
G. Networks
Answer: B, D, E, F, G
187. IQN (iSCSI qualified name) – Can be up to 255 characters long and has the following format:
A. iqn..:,where represents the year and month your domain name was registered,
B. iqn..:,where represents the year and month your domain name was registered,
C. There is no such thing as IQN
D. The other alternatives are all incorrect.
Answer: B

188. You can expand a datastore that uses the VMFS format by attaching a hard disk partition as an extent. The datastore can span over __ physical storage extents.
A. 56
B. 32
C. 256
D. 24
Answer: B
185. When you use SAN zoning, keep in mind the following:
A. ESX Server hosts that use shared storage for failover or load balancing must be in different zones.
B. ESX Server hosts that use shared storage for failover or load balancing must be in one zone.
C. If you have a very large deployment, you might need to create separate zones for different areas of functionality
D. It does not work well to create many small zones of, for example, two hosts with four virtual machines each.
Answer: B, C, D

186. When configuring your iSCSI initiators, make sure they have proper names. The initiators can use one of the following formats:
A. FQDN (fully qualified domain name)
B. IQN (iSCSI qualified name)
C. IQDN (iSCSI qualified domiain name)
D. EUI (extended unique identifier)
Answer: B, D
179. SCSI reservations are not held during metadata updates to the VMFS volume. ESX Server uses ____________ SCSI reservations as part of its distributed locguide protocol.
A. long term
B. file level
C. short-term
D. short-lived
Answer: D

180. The more virtual machines are sharing a VMFS, the greater the potential for performance degradation due to I/O contention.
A. True
B. False
Answer: A

181. A VMFS holds files, directories, symbolic links, RDMs, and so on, and corresponding metadata for these objects. Metadata is accessed each time the attributes of a file are accessed or modified. These operations include, but are not limited to:
A. Powering a virtual machine on or off.
B. Creating, growing, or locguide a file
C. Changing a file’s attributes.
D. Creating a virtual machine
E. Powering an ESX host on or off.
Answer: ABC

PassGuide Cisco Exams Questions & Training Materials

1. Free vmware vcp-310 braindumps (1)
2. Free juniper jn0-522 JNCIA-FWV braindumps
3. Free 642-972 braindumps
4. Free citrix 1y0-a09 braindumps
5. Free New Vmware Vcp-310 Question
6. Free Passguide JNCIA-FWV JN0-521 Exam
7. Free new hp hp0-j22 braindumps
8. Free sy0-201 braindumps (1)
9. Free passguide cisco ccip 642-642
10. Free 642-456 braindumps
11. Free f50-521 braindumps
12. Free Download Passguide cisco ccnp bcmsn 642-812 2.95 3.10